NMS-95-2 Hand Cleaning Paste

Hand Cleaning Paste NMS-95-2 is an abrasive technical paste for cleaning the skin of the hands from heavy and persistent contamination of industrial and operational origin. The product is intended for removing oils, greases, graphite, bitumen, resins, residual metalworking fluids, technical dust, and other heavy dirt that cannot be effectively washed off with ordinary soap.
The paste contains an abrasive filler and is primarily used where soft household washing is not enough and effective hand cleaning is required after work with heavy technical contamination.

Purpose

NMS-95-2 paste is used for cleaning hands from:

• machine oils;
• greases;
• graphite;
• bituminous contamination;
• resins;
• metalworking fluids;
• technical dust;
• persistent industrial dirt;
• other heavy petroleum-based contamination.

Where it is used

The paste is suitable for use:

• at vehicle service stations;
• in mechanical engineering;
• in metalworking;
• in foundry operations;
• in repair workshops;
• at industrial enterprises;
• in service and technical departments;
• in garages, workshops, and production areas.

Main properties

NMS-95-2 is a technical hand-cleaning product, not a cosmetic product for daily skin care.

Main features of the paste:

• high cleaning efficiency against heavy contamination;
• abrasive filler that enhances cleaning action;
• effective removal of dense oily and technical contamination;
• suitable for use after work involving greases, oils, graphite, bitumen, and metalworking fluids;
• practical use in industrial and repair conditions.
  The paste cleans well precisely because it works actively. For this reason, it should not be positioned as a mild, caring, or cosmetic product.

Important note on skin contact

NMS-95-2 has an alkaline character and is intended for effective removal of heavy contamination. After washing, all paste residues should be thoroughly rinsed off with water so that neither the abrasive nor the cleaning base remains on the skin.
Since the product actively removes oils, greases, and persistent technical contamination from the skin, it is recommended to use a rich or nourishing hand cream after application, especially with regular use.

Directions for use

1. Apply a small amount of paste to dry, contaminated hands.
2. Rub thoroughly over the contaminated areas.
3. If necessary, add a small amount of water and continue cleaning.
4. After removing the contamination, rinse the paste thoroughly with plenty of water.
5. Dry the hands.
6. After washing, it is recommended to apply a rich or nourishing hand cream.

Precautions

• avoid contact of the paste with eyes, mucous membranes, damaged, irritated, or inflamed skin;
• do not use on damaged or irritated skin of the hands;
• after use, always rinse the paste thoroughly with plenty of water;
• with frequent use, it is recommended to apply a rich or nourishing hand cream;
• in case of contact with eyes, rinse immediately with plenty of water.

Storage

The paste should be stored in a tightly closed container, as it may dry out when left open.
If partial drying occurs, the paste can be softened by adding a small amount of water followed by thorough mixing until the working consistency is restored.
Store in a dry place at a moderate temperature. Do not leave the container open for a long time.

Who this paste is suitable for

NMS-95-2 is suitable for workers who regularly come into contact with:

• oils;
• greases;
• graphite;
• bitumen;
• metalworking fluids;
• technical dust;
• persistent industrial contamination.

Advantages

• effective hand cleaning from heavy technical contamination;
• abrasive action for removing dense dirt;
• suitable for vehicle service stations, industry, workshops, and repair work;
• can be used after contact with oils, greases, graphite, bitumen, and metalworking fluids;
• suitable for practical industrial use.

Follow this link and see all products from the Detergents category

Conclusion

Hand Cleaning Paste NMS-95-2 is an abrasive technical paste for effective cleaning of hands from heavy industrial and petroleum-based contamination. It is suitable for vehicle service stations, industry, workshops, metalworking, and repair work where ordinary mild washing is not sufficient and real removal of heavy dirt is required.
After use, the paste should be thoroughly rinsed off, and a rich or nourishing hand cream is recommended for skin care. The paste should be stored only in a tightly closed container, since when it dries out it may lose its normal consistency, but it can be softened by adding a small amount of water.

FAQ

What types of contamination is NMS-95-2 suitable for?

The paste is suitable for removing oils, greases, graphite, bitumen, resins, metalworking fluids, and persistent technical dirt.

Is this paste a mild product for the skin?

No. It is a technical abrasive paste for heavy contamination, not a delicate cosmetic product.

Should cream be applied after use?

Yes. After washing, it is recommended to use a rich or nourishing hand cream, especially with regular use.

Why should the paste be stored in a closed container?

Because in an open container it may dry out and lose its normal consistency.

What should be done if the paste dries out?

It can be softened by adding a small amount of water followed by thorough mixing.

Does the paste need to be rinsed off thoroughly after washing hands?

Yes. After use, the paste must be completely rinsed off with plenty of water.