Detergent for foaming engine cleaning

Detergent for foam cleaning of units, mechanisms and heavily contaminated surfaces

The foam cleaning detergent is a highly alkaline foam concentrate for cleaning units, mechanisms, parts, transport and industrial equipment from oils, dirt, resins, fats, traces of technical fluids, cutting and cooling fluids (CCF), bituminous and road contamination. The product is intended for use in high-pressure machines, foam generators, as well as in professional washing systems.

The product contains a corrosion inhibitor, promotes effective dissolution of complex operational contaminants and can be used in various industries where fast and effective technical surface cleaning is required.

Main advantages

• highly alkaline foam cleaning detergent for technical cleaning;
• effective removal of oils, fats, resins, dirt and residues of technical fluids;
• suitable for use in high-pressure machines;
• suitable for mechanical and automatic washing modes;
• contains a corrosion inhibitor;
• contains biodegradable surfactants (SAA);
• fire- and explosion-safe product;
• suitable for professional cleaning of transport, industrial and technological equipment.

Where it is used

The foam cleaning product may be used for:

• cleaning units, assemblies and mechanisms from oils and technical contamination;
• washing transport and transport-technological equipment;
• cleaning stationary industrial equipment;
• washing parts, metal surfaces, units and assemblies;
• cleaning external heavily contaminated surfaces in industry, car service, municipal and agricultural sectors;
• professional use in car washes, service stations (STO), manufacturing enterprises, bus depots and service zones.

What contaminants it removes

The detergent effectively works against the following contaminants:

• solid oils;
• lubricants;
• resins;
• bituminous residues;
• cutting and cooling fluids (CCF);
• road and technical dirt;
• fatty contamination;
• insect traces;
• other operational contaminants on metal and alkali-resistant surfaces.

Important clarification regarding car engine washing

The product may be used for cleaning engines, units, mechanisms and assemblies from heavy technical contamination, however ordinary car engine washing without preparation is not recommended.

During cleaning of a vehicle engine compartment there is a risk of water and washing solution entering:

• electrical wiring;
• connectors;
• sensors;
• control units;
• ignition coils;
• generators;
• other electrical and electronic components.

This may lead to errors in the electrical system, difficult starting, unstable engine operation or damage to individual components.

Therefore, when cleaning a vehicle engine compartment, the product should only be used with caution, with prior protection of sensitive electrical elements and without directing a high-pressure jet at wiring, connectors and electrical equipment.

The most appropriate use of this product is for cleaning dismantled units, parts, assemblies, external metal surfaces and industrial equipment.

Areas of application

The product is appropriate for use in the following sectors:

• car service;
• industrial enterprises;
• agriculture;
• construction;
• municipal services;
• self-service car washes;
• transport enterprises;
• bus depots;
• service and repair zones.

Method of application

Recommended working concentration: 0.8–2% depending on the degree of contamination.

Before use, it is recommended to test the product on a small area of the surface in an inconspicuous place.

Do not apply the product on unpainted surfaces and damaged metal areas made of sensitive alloys.

For high-pressure machines

1. Prepare a working solution with water at the required concentration.
2. Set temperature and dosing on the washing equipment.
3. Apply the product to the surface.
4. Allow it to act for 1–2 minutes.
5. Rinse thoroughly with water.

For self-service car washes and professional washing systems

1. Fill the washing system with the detergent.
2. Set temperature and dosing.
3. Start the cleaning programme.
4. After completion of the cycle, thoroughly rinse off any remaining product with water.

Important recommendations during use

• do not allow the product to dry on the surface;
• do not leave the solution on the coating longer than necessary for cleaning;
• when working with sensitive materials, always carry out a preliminary test;
• do not direct a high-pressure jet at vehicle or equipment electrical systems;
• do not mix with other products without checking compatibility.

Precautions

The product contains alkali, therefore during use it is mandatory to use:

• protective goggles;
• gloves;
• protective mask or respirator;
• rubber apron or other protective clothing.

In case of eye contact

Rinse with plenty of running water for 5–10 minutes. If contact lenses are present, remove them and continue rinsing. Seek medical attention if necessary.

In case of skin contact

Remove contaminated clothing, rinse the affected area with plenty of water or take a shower.

Characteristics of active foam for engines

Follow the link and see all products from the Detergents catalogue

Frequently asked questions (FAQ)

Is the product suitable for washing a car engine?
Yes, but only with caution. Without preparation of the engine compartment and protection of wiring, connectors and electrical equipment, ordinary engine washing is not recommended.

Can the product be used in a high-pressure machine?
Yes, the product is intended for use in high-pressure machines and professional washing systems.

What is the working concentration?
The recommended concentration is 0.8–2% depending on the degree of contamination.

What contaminants does this product remove?
The product effectively removes lubricants, resins, bitumen, CCF, fats, dirt, residues of technical fluids and insect traces.

Can it be used on all metal surfaces?
No. It is not recommended to use the product on unpainted surfaces and damaged metal areas of sensitive alloys without prior testing.

Is the product suitable for industrial equipment?
Yes, the product is suitable for cleaning stationary industrial equipment, units, assemblies and parts.