Active alkaline foam for contactless washing

Active alkaline foam for contactless washing application

In the industry

Active alkaline foam for high-pressure apparatuses to buy in Kharkiv you can buy in the online shop of chemicals Novohim.

Active foam pH 11-12 units – is an effective alkaline detergent for non-contact cleaning. Can be used for:

• Lorry washes
• For bus depots
• Car and motorbike washes
• Cleaning of agricultural machinery

The active composition of foam with high alkali content causes its application in many branches of economy and industry:

• Automobile industry
• Car service centres
• Construction
• Agriculture
• Self-service car washes
• Industry

Advantages of using active alkaline foam:

1. Active alkaline foam for car washing easily and effectively cleans oil, lubricating fluids, tar, grease, stains, dirt, insect marks and other mineral deposits.
2. A pH level of 11-12 units promotes faster cleansing, improves performance.
3. Reduces friction and protects car paintwork surfaces.
4. Creates a thick, voluminous foam.
5. Reduces the degree of recontamination.

Alkaline Foaming Cleanser is a fast acting, effective product. Suitable for:

• Carwashes
• Self-service car washes
• High-pressure apparatus
• HPA with foam nozzle

Active alkaline foam contains biodegradable surfactants, which meets the requirements of regulatory documents.

Instructions for use of active alkaline foam:

Shake the product. Dilute with water in a concentration of 1:3 depending on the degree of contamination for the foam set. For sprayers apply in concentration 1:10 – 1:20 with water. If necessary, pre-treat the contaminated surface with water, then apply the working solution of foam, keep for 1-3 minutes for activation and rinse with water.

Before using active alkaline foam, we recommend testing on a hidden area of the surface of the equipment to be treated.

For high-pressure apparatus:

1. Prepare a solution with water at the required concentration
2. Set temperature (max 40°C) and dosage on the washing device
3. Apply active alkaline foam to the entire surface and allow to work in
4. Allow 1-3 minutes for the product to activate
5. Rinse off the product thoroughly with water

For self-service washes:

1. Prepare a solution with water at the required concentration
2. Set temperature (max 40°C) and dosage on the washing device
3. Apply active alkaline foam to the entire surface and allow to work in
4. Allow 1-3 minutes for the product to activate
5. Rinse off the product thoroughly with water

For carwashes:

1. Pour detergent into the system
2. Set temperature and dosage
3. Switch on the cleaning programme

IMPORTANT: Do not allow the foam to dry on the surface.

Precautions:

When working with active alkaline foam it is obligatory to use personal protective equipment (goggles, gloves, rubber apron, protective mask). The product contains alkali.

In case of contact with eyes – rinse with running water for 5-10 minutes. Remove contact lenses (if available). Rinse again. If necessary, consult a doctor.

In case of skin contact – remove soiled clothing, rinse the area with water or take a shower.

Follow the link and see all products from the Cleaning products catalogue

Active alkaline foam can be bought from the warehouse of Novohim Company in Kharkiv and with delivery in Kyiv, Sumy, Poltava, Dnipro, Zaporizhzhia, Kherson, Vinnytsia and all over Ukraine.