MasterRez thread cutting and drilling oil for non-ferrous metals can be purchased for metalworking from the warehouse of the Novohim online chemical reagents store.

This is a ready-to-use lubricant for metalworking processes that effectively lubricates and cools, based on highly refined oil. It is designed for thread cutting, deep drilling, gear cutting, and other heavy-duty cutting operations, especially for non-ferrous metals. In addition, when you buy MasterRez Thread Cutting Oil for Non-Ferrous Metals, you get lubrication, tool protection and clean machining even under heavy loads.

The oil penetrates deep into the cutting zone, forming a thin but durable oil film that stabilises the thread cutting and drilling process. This allows you to achieve:

1. High surface cleanliness
2. Extended tool life
3. Increased productivity on all types of machines.

MasterRez thread cutting oil effectively reduces friction between the cutting tool and the metal surface, preventing galling, increased wear and thermal damage to the edges. This is particularly important when working with soft non-ferrous metals that are prone to sticking, such as:

• copper
• aluminium
• brass
• titanium
• and their alloys.

MasterRez oil for processing non-ferrous metals demonstrates excellent performance results:

1. Heavy cutting, tooth cutting and thread cutting
2. Deep drilling
3. Milling and broaching
4. Blade machining
5. On band saws

MasterRez does not contain chlorine-containing or active sulphur components, is safe to use, does not cause corrosion and has natural lubricating and cooling properties.

It is suitable for both manual processing and use in production conditions on machine tools. Thanks to its excellent fluidity and thermal stability, MasterRez thread cutting and drilling lubricant demonstrates consistent results even in difficult drilling areas and when processing thin-walled parts.

You can view the full range of pool chemicals from Novohim by following the link.

The price of thread cutting and drilling lubricant fully justifies its usefulness and wide range of applications in complex metalworking operations.

MasterRez thread cutting and drilling lubricant for non-ferrous metals can be bought from Novohim’s warehouse in Kharkiv and delivered to Kyiv, Zaporizhia, Poltava, Sumy, Kherson, Vinnytsia and throughout Ukraine.

The MasterRez thread cutting and drilling oil for non-ferrous metals message appeared first on Novohim.

Defender Oil 210 for tapping and drilling to buy for metalworking from the warehouse of Novohim online chemical shop.

This is a ready-to-use lubricant for metalworking processes, effectively lubricates and cools, based on high purity oil. Ensures high-quality processing and lubrication thanks to its modern composition and the presence of EP (Extreme Pressure additives) anti-seize additives for extreme loads.

It is designed for tapping, deep hole drilling, gear cutting, other heavy cutting modes, especially for hard-to-machine metals. In addition, if you buy Defender Oil 210 threading lubricant, you get an enhanced complex of anti-seize, anti-wear and detergent additives. in addition, there are corrosion inhibitors in the composition.

Defender Oil 210 thread lubricant is distinguished by its unique properties. Firstly lubricating and secondly anti-corrosive. Recommended for machining ferrous metals:

• cast iron
• hard steels
• their alloys
• etc.

Defender Oil 210 has high performance in these metalworking operations:

1. Heavy cutting, tapping and threading operations
2. Deep drilling
3. Milling and broaching
4. Blading
5. On band saws

Defender Oil 210 is part of the premium range of coolants.

To view the full range of Novohim coolants, please click here.

The price of threading and drilling lubricant justifies the usefulness and breadth of its application in complex metalworking operations.

Defender Oil 210 buy from the warehouse of Novohim Company in Kharkiv and with delivery in Kyiv, Zaporizhzhia, Poltava, Sumy, Kherson, Vinnytsia and all over Ukraine.

The Threading and drilling oil Defender OIl 210 message appeared first on Novohim.

Defender Oil Strong application

Universal mineral cutting fluid Defender Oil Strong with a high oil content buy in the online store of chemicals Novohim.

Defender Oil Strong, a high oil content water-miscible oil coolant, was developed as a universal emulsion for all types of steel, including heat-resistant steels, cast iron, aluminium and non-ferrous metals.

The Defender OIl Strong metalworking cutting fluid has a package of professional additives of European quality that allows for efficient and safe processing of ferrous and non-ferrous metals. In addition, the cutting fluid is enhanced with bactericidal properties and is highly resistant to bacterial damage, even during prolonged equipment downtime. At the same time, Defender Oil Strong oil-based metalworking cutting fluid has excellent lubricating and anti-corrosion properties.

The advantages of Defender Oil Strong cutting fluid:

1. The cutting fluid composition is reinforced with special European additives.
2. It enables efficient and safe processing of ferrous and non-ferrous metals.
3. The lubricating properties of the coolant have been increased by 3 times.
4. Enhanced resistance to corrosion and fungal attack.
5. Compatible with all types of metalworking equipment.
6. It works on water of any hardness.
7. Easy to mix.

Breeding recommendations:

Before dilution, the coolant concentrate must be thoroughly stirred. Defender Oil Strong Concentrate 0.5 litres (depending on the type of treatment) is poured into 9,5 litres of hot water and mixed thoroughly using a mixer. Specifically, it works at a 5% concentration of the working solution.

Also note that all oil-based emulsions are highly sensitive to water quality. We therefore recommend that, if the water used to prepare the working solution is hard, you soften it using soda ash. Afterwards, stir thoroughly until the soda ash has dissolved completely.

IMPORTANT! To prepare the DEFENDER STRONG working solution correctly, you must strictly follow the manufacturer’s recommendations.

IMPORTANT! Pouring water into concentrate is FORBIDDEN!

Regularly adjust the working solution in the machines using a refractometer. Observe the concentration in accordance with the supplier’s recommendations.

Refill the machines only with coolant solution, not water!

Store the cutting fluid at a temperature of +5°C and above.

Please note: The price of the working solution is 20 times cheaper than the price of the coolant concentrate (calculated for a concentration of 5%).

Types of treatment and recommended concentration of the working solution:

• Grinding-3%
• Turning-5%
• Drilling-5%
• Deep drilling-5%.
• Milling-5
• Boring-5%.
• Honing-5%

Follow the link to see all products in this category

You can buy Defender Oil Strong oil-based water-miscible coolant in Kharkiv from Novohim warehouse or with delivery in Kyiv, Poltava, Sumy, Zaporizhzhia, Dnipro, Vinnytsia and throughout Ukraine.

The Defender Oil Strong oil-based water-miscible cutting fluid message appeared first on Novohim.

Our product range also gives you the opportunity to order and buy paste for thread-cutting, cutting fluid for deep drilling and other heavy metal-working operations.

Where can buy cutting fluid for metal drilling at the best price in Ukraine?
What features and functions should a metal cutting fluid for deep drilling?
How to save the cutting tool when drilling metal?
Where can I buy coolant for tapping threads in stainless steel?

With the help of this article and our technicians you can solve these questions and problems by calling +38 (067) 559-99-07, +38 (099) 799-99-92 or send a message via Viber +38 (067) 559-99-05.

There is a perception in society that when performing a particular metalworking operation, you can do without the use of coolant and lubricant cutting fluid. In other words, cut costs or use cheap folk remedies. Such “economy” leads to a significant reduction in life of expensive tools, equipment and reduced quality of metal surfaces processing by 40-50%.

What do you need to pay attention to when choosing cutting fluid for drilling and threading?

To correctly buy coolant for metal drilling and threading in Ukraine you should pay attention to the following criteria, which it must have.

Top 3 properties of cutting fluid for deep drilling and threading:

1. Reduces friction force during machining (has the highest lubricating ability);
2. Removes heat from the cutting zone (effective cooling capacity)
3. Effectively removes chips from the drilling area (has high washing properties).

Buy coolant threading and cutting coolant in Ukraine.
Paste for metal drilling can be purchased from the manufacturer in Kharkiv. We recommend ordering oil-containing water-soluble and water-soluble coolants for drilling, deep drilling and thread-cutting.

The composition of these lubricants-coolants will 100% ensure the highest quality of machining, guarantees doubling of tool life and maximum lubricating properties. threading paste is suitable for drilling of all steel grades, cast iron and other ferrous and non-ferrous metals.

Depending on production conditions and customer requirements our specialists will select the most suitable modification Coolant Biol or Defender for drilling, tapping and other heavy metalworking operations.

In addition, we recommend a specialized paste for tapping, which you can buy from 1kg. Defender Zoom is a cutting fluid for tapping, drilling and deep hole drilling. Specially developed high-tech compound for heavy metalworking operations.

Why buy threading paste?

1. Reduces the stress on your cutting tools by half.
2. Reduces friction between workpiece and tool by up to 80%.
3. Improves the quality of the machined surface by more than 50%.
4. Improves tool wear resistance
5. Has an economical flow rate
6. Has a 100% guarantee of lubricating properties.
7. Protects the part from possible damage during machining
8. Safe for people and the environment.

Works with metals such as: aluminum, titanium, steel, stainless and high-alloy steel, cast iron.

Application possibilities for thread cutting paste:

1.  Undiluted – The paste is ready to use. Can be applied by brush or tool dipping.
2. Can be diluted with 30-50% water.
3.  Can be used as Lubricant-coolant fluid for lathes in concentration of 5%.

 Paste for thread-cutting Defender Zoom and cutting fluid for drilling can be bought in Kharkiv and with delivery in Kyiv, Zaporizhzhia, Poltava, Sumy, Dnipro, Vinnytsia, Kherson and all over Ukraine.

Get technical advice and order coolant for deep drilling directly on the site or by phone sales department. Apply!

The Threading paste Defender Zoom / Cutting fluid for tapping and drilling message appeared first on Novohim.

Oil cutting fluid Defender “Oil” can be bought for metalworking from the warehouse of Novohim online store of chemicals.

This is a non-water-mixable lubricant-coolant on the basis of highly purified oil. In addition, it has an enhanced complex of extreme pressure, anti-wear and detergent additives. It also contains corrosion inhibitors.

Oil coolant Defender “Oil” is distinguished, first of all, by its unique properties. Firstly, lubricating, and secondly – corrosion protection. It is recommended for processing of ferrous and non-ferrous metals:

• cast iron
• hard-to-machine steels
• brass
• bronze
• titanium
• copper
• aluminum, etc.

Non-miscible cutting fluid Defender “Oil” showed high results at operations:

1. heavy cutting modes, gear cutting and threading
2. deep drilling
3. milling and broaching
4. blade machining
5. on band saws

Store the coolant at a temperature of +5°C or above!

Oil-based cutting fluid is a part of the premium range of cutting oils. You can buy Defender Oil cutting oil coolant along with universal water-mixable cutting fluids  Defender “Pro” and Defender “Light”  at Novohim Company.

Example application:

Aluminum profile production facility 

 Initial situation In May of this year we purchased Defender “Oil” for tests on the cutting machine, while working with aluminum profiles. The previously used “Asfol” coolant was not satisfactory: the surface was dirty and had to be washed after machining. Also, the end face had burrs and crumbling, and the profile was frequently broken.

The solution The machine was filled with 50 liters of oil-based cutting fluid Defender.

The result The tests were conducted over a period of two weeks. According to the company director, the processing quality improved by 90% during this time. Moreover, the profile cut is now even, there are no breaks or burrs. Moreover, the profiles are clean and do not need additional washing after treatment.

The price of oil-based cutting fluid quite justifies its usefulness and width of use in complicated metal-working operations.

Oil cutting fluid Defender can be purchased from a warehouse in Kharkiv and with delivery in Kyiv, Zaporizhzhia, Poltava, Sumy, Kherson, Vinnytsia and all over Ukraine.

The Oil cutting fluid Defender OIL message appeared first on Novohim.

Defender Pro is a premium semi-synthetic water-miscible metalworking fluid for mechanical metalworking operations. The product is supplied as a concentrate and, after mixing with water, forms a working solution for turning, milling, drilling, grinding, boring, honing, bandsaw cutting, and other metalworking operations.
The main feature of Defender Pro is its high content of functional components and high oil content. It is not a “light” synthetic fluid and not a standard entry-level emulsol. It is a higher-grade semi-synthetic metalworking fluid intended for cases where the following are required:

• enhanced lubricating properties;
• better tool protection;
• clean machining and good surface finish;
• stable operation on modern equipment;
• suitability for more heavily loaded conditions than standard universal products.

What Defender Pro is

Defender Pro is a semi-synthetic metalworking-fluid concentrate with a high content of functional components. To understand the product logic, it is important that it contains a very large share of an active functional system, including mineral oil, fatty-acid soaps, and other functional components that form its lubricating, cooling, cleaning, anticorrosion, and operating properties.
That is why Defender Pro occupies a different position from low-cost basic emulsols or light synthetic products. It is a metalworking fluid for more demanding tasks where a balance of lubricating properties, stability, machining cleanliness, and tool life is required.

What class Defender Pro belongs to

Within the economy — standard — premium classification, Defender Pro belongs specifically to the premium class.
This means it is not focused on the lowest concentrate price, but on more demanding working conditions where the following matter:

• enhanced lubricating properties;
• working-solution stability;
• low foaming;
• use on modern machine tools;
• surface quality;
• machining cleanliness;
• long working-solution life when the system is properly maintained.

What Defender Pro is used for

Defender Pro is used for:

• cooling the tool and workpiece in the cutting zone;
• reducing friction between the tool and the metal;
• reducing cutting-tool wear;
• improving machined surface quality;
• stabilizing the cutting process;
• providing corrosion protection for equipment and parts;
• operation in machine systems with low, medium, and part of high-speed machining conditions.

Where Defender Pro is most appropriate

Defender Pro is most appropriate where the following are required:

• a semi-synthetic metalworking fluid with high oil content;
• enhanced lubricating properties;
• machining of stainless steel, high-alloy steels, cast iron, aluminum, and its alloys;
• use on CNC machines, automatic and semi-automatic equipment;
• stable operation under heavier conditions than standard universal emulsols;
• low foaming;
• long working-solution life without constant corrective additions.

The product is appropriate for use in:

• machine building;
• production of stainless-steel parts;
• production of agricultural machinery components;
• metalworking shops;
• modern CNC equipment;
• general-purpose machinery where not just basic but enhanced lubricating properties are required.

Suitable materials

Defender Pro is suitable for machining:

• carbon steels;
• alloy steels;
• high-alloy steels;
• stainless steels;
• cast iron;
• aluminum and its alloys.

The phrase “for all grades of steel, including super-hard grades” should not be used as an absolute claim. A more correct phrasing is: the product is suitable for a wide range of steels, including high-alloy and difficult-to-machine grades, but actual performance always depends on machining conditions, tooling, the specific operation, and the correctly selected concentration.

What machining conditions Defender Pro is intended for

Defender Pro is designed for a wider range of operating conditions than classic oil-containing standard-grade emulsols. It can be used:

• on low-speed machines;
• in medium-duty conditions;
• in part of high-speed machining conditions where a combination of cooling, lubricating properties, and solution stability is required.

This does not mean the product is equally suitable for any extreme machining condition without limitations. But in the premium semi-synthetic metalworking-fluid segment, Defender Pro has a strong position exactly where standard emulsols are already weak and light synthetics may fail to provide the required lubricating effect.

Main properties and advantages of Defender Pro

Main product properties:

1. semi-synthetic water-miscible metalworking-fluid concentrate;
2. high oil content;
3. high content of functional components;
4. enhanced lubricating properties;
5. low foaming;
6. suitability for more difficult operations and more heavily loaded conditions;
7. good machined surface quality;
8. clean part surfaces after machining;
9. stable working-solution life under proper operation;
10. corrosion protection;
11. suitability for modern equipment, including CNC machines.

One point should be emphasized separately: Defender Pro is not just a universal fluid, but a product with a strong focus on lubricating performance. This is what makes it effective for stainless steels, high-alloy steels, cast iron, and other materials where ordinary products may work less effectively.

What high oil content and high functional-component content provide

The high oil content and strong functional system in Defender Pro provide several practical effects:

• better boundary lubrication;
• lower tool wear;
• better surface quality;
• more stable performance in difficult operations;
• better suitability for steels and stainless materials;
• a higher working level compared with basic semi-synthetic or low-cost emulsion products.

This does not mean the product automatically outperforms any imported equivalent. A more accurate statement is: within its class, Defender Pro is designed for a high working level and can successfully compete with expensive products where lubricating performance, machining quality, and long solution life are important.

Practical operating experience with Defender Pro

In stainless-steel machining

In production trials, Defender Pro showed:
• high machining quality;
• good lubricating properties;
• stable working-solution performance;
• long service life in the system when concentration was controlled and operating practice was correct.

In production of agricultural machinery parts

Under production conditions, Defender Pro showed:
• reduced tool wear;
• high cleanliness of the machined surface;
• stable operation without pronounced foaming problems;
• long working-solution life without constant addition of corrective components.

On a bandsaw machine

During production trials on a bandsaw machine, Defender Pro showed a significant increase in saw-blade life compared with the product used previously. Under specific conditions, blade life was up to 2.5 times longer.
This result is explained by the combination of lubricating properties, working-solution stability, and the correctly selected concentration. The actual effect depends on:
• material;
• cutting conditions;
• blade type;
• machine condition;
• blade tension;
• operating conditions;
• correct working-solution management.
For that reason, this result should be treated as a practical production case, not as a universally guaranteed result for all conditions.

Recommended working-solution concentrations

• Turning: 3%
• Drilling: 4%
• Deep drilling: 5%
• Broaching: 3%
• Gear cutting: 5%
• Rolling and thread cutting: 5%
• Milling: 4%
• Boring: 3%
• Honing: 3%
• Bandsaw cutting: the working concentration should be selected according to actual cutting conditions, material, and machine operating mode.

Recommended concentrations may be adjusted depending on:

• material;
• machining conditions;
• tool type;
• system condition;
• supply method;
• water quality;
• actual operating load.

How to use Defender Pro correctly

To obtain a stable result, the following is recommended:

1. Fill the system with clean water.
2. Add the concentrate to the water.
3. Prepare a working solution of the required concentration.
4. Mix until homogeneous.
5. Supply the working solution to the cutting zone through the coolant system.
6. Check concentration with a refractometer during operation.

Before preparing the working solution, the concentrate must be thoroughly mixed until homogeneous.

Important note on water

The old text says that Defender Pro is easily prepared with ordinary tap water without additional treatment. That wording should not be left as an absolute claim.
A more accurate version is:
Defender Pro can work normally with ordinary tap water in many production environments, but actual water quality still affects working-solution stability, foaming, corrosion protection, and metalworking-fluid service life.
That means:
• it is not as water-sensitive as classic oil-containing emulsols;
• but it is still wrong to claim that water quality does not matter at all.

Storage

Defender Pro concentrate should be stored:

• in tightly closed containers;
• indoors;
• at temperatures from +5 °C and above;
• without freezing;
• without prolonged exposure to direct sunlight.

If you have a real upper storage limit of +40 °C, it is better to keep that as a separate technical parameter in the product card or technical data sheet.

Economics of use

At working concentrations of 3–5%, the cost of the ready working solution is many times lower than the cost of the concentrate. This is one reason why Defender Pro may be economically justified even when the concentrate itself is more expensive than simpler products.
The product should be evaluated not only by the price of the canister or drum, but by:
• solution life;
• tool wear;
• surface quality;
• consumption;
• system stability.

When Defender Pro may not be the best choice

Defender Pro should not be presented as the only correct product for all tasks.
In other cases, the following may be more appropriate:
• synthetic metalworking fluids, if the main criteria are system cleanliness, lower oiliness, and higher operating stability;
• specialized products for non-ferrous metals, if the main task is copper, brass, or bronze;
• narrowly specialized formulations, if the application involves extremely heavy conditions requiring special EP lubrication.
The strength of Defender Pro is not in a slogan like “for everything,” but in the fact that it is a premium semi-synthetic metalworking fluid with high oil content for serious metalworking.

Conclusion

Defender Pro is a premium semi-synthetic water-miscible metalworking fluid with a high content of functional components and a high oil content. The product is intended for modern metalworking where enhanced lubricating properties, good surface quality, low foaming, stable solution life, and suitability for more heavily loaded conditions than standard emulsols are required.
The product is most appropriate for machining steels, including stainless and high-alloy grades, cast iron, aluminum, and its alloys, as well as for operation on modern equipment, including part of CNC machines. When used correctly, Defender Pro provides not only cutting-zone performance, but also normal overall system stability.

FAQ

What is Defender Pro?

It is a premium semi-synthetic water-miscible metalworking fluid with high oil content and a high level of functional components for mechanical metalworking operations.

What operations is Defender Pro suitable for?

It is suitable for turning, drilling, deep drilling, milling, broaching, gear cutting, boring, honing, bandsaw cutting, thread cutting, and other metalworking operations.

What materials is Defender Pro suitable for?

It is suitable for carbon steels, alloy steels, high-alloy steels, stainless steels, cast iron, aluminum, and its alloys.

Is Defender Pro suitable for CNC machines?

Yes. The product is suitable for modern equipment, including part of CNC machines, automatic, and semi-automatic equipment.

Does water quality matter for Defender Pro?

Yes. The product can work with ordinary tap water in many cases, but actual water quality still affects stability, foam, corrosion protection, and solution life.

Can Defender Pro be used on a bandsaw machine?

Yes. In production trials on a bandsaw machine, the product showed a significant increase in blade life. In one specific case, service life was up to 2.5 times longer, but the actual result depends on operating conditions.

How does Defender Pro differ from ordinary products?

It offers a higher level of lubricating performance, higher oil content, better suitability for more heavily loaded operations, and better applicability to more difficult materials

Follow this link to see all products in this category

Read 10 rules for working with cutting fluid here

The Lubricant-coolant fluid Defender PRO \ Cutting fluid Defender PRO message appeared first on Novohim.