Synthetic cutting fluid Defender Expert for machine tools buy in the online store of chemicals Novohim.

Defender Expert cutting fluid is a modern technological fluid for metalworking of ferrous and non-ferrous metals (including copper). Thanks to effective additives in its composition, this coolant has high anti-corrosion properties, moderate lubricating properties and strong cooling capacity.

Advantages of Defender Expert cutting fluid:

1. Economical – working solution with concentration of 3%.
2. The composition of Defender Expert metal coolant is reinforced with additives of high European quality.
3. Suitable for processing of non-ferrous metals including copper.
4. Increased resistance to corrosion and fungal attack by 5 times.
5. Suitable for centralised systems and machines with circulation.
6. Compatible with all types of metalworking equipment.
7. Works on water of any hardness.
8. Easy to mix.

In addition, Defender Expert cutting fluid is also foam-free. This synthetic coolant removes fine swarf and abrasive wear products. Suitable for use on all types of steel, including stainless, heat-resistant and high-alloyed grades, cast iron, aluminium, non-ferrous metals.

Recommendations for breeding:

Lubricant and coolant Defender Expert concentrate 0.3 litres (depending on the type of treatment) into 9.7 litres of water and mix thoroughly.

IMPORTANT: Do not pour water into the concentrate!

Regularly adjust the working solution in the machines using a refractometer. Adhere to the concentration according to the supplier’s recommendations.

Fill the machines only with the working coolant solution, not with water!

Please note: the price of working solution is 20 times cheaper than the price of coolant concentrate (calculation for 5% concentration).

Types of machining and recommended concentration of the working solution:

• Grinding-3%
• Turning-3%
• Drilling-3%
• Milling-3%
• Boring-3%
• Honing-3%

Follow the link to see all products in this category

Synthetic cutting fluid Defender Expert can be bought in Kharkiv from the warehouse of Novohim Company or with delivery in Kyiv, Poltava, Sumy, Zaporizhzhia, Dnipro, Vinnytsia and all over Ukraine.

The Synthetic cutting fluid Defender Expert / Synthetic cutting fluid for machine tool Defender Expert message appeared first on Novohim.

Synthetic cutting fluid Defender Ultra Winter for machine tools buy in Novohim online shop of chemicals.

Defender-Ultra ZIMA -20°C synthetic machine tool coolant has a unique formulation and was developed specifically as a cutting fluid that has an extended service life even under extreme production conditions. Defender-Ultra ZIMA is specially designed to work in unheated workshops where the temperature can drop to -20°C. In addition, this technological fluid for metalworking has enhanced bactericidal abilities and high resistance to bacterial damage, excellent washing and lubricating properties.

It is also important to note the economical consumption and reduction in overall coolant procurement costs for production due to the extended application life of Ultra synthetics.

Advantages of Defender-Ultra Winter cutting fluid:

1. Distinctive feature – 3 times longer service life even when the equipment is idle.
2. Ability to work at low temperatures down to -20C.
3. The composition of Ultra metal coolant is reinforced with synthetic components of high European quality.
4. The resistance to corrosion and fungal attack is increased by 5 times.
5. Recommended operations: turning, milling, drilling, grinding.
6. Compatible with all types of metalworking equipment.
7. Works on water of any hardness.
8. Easy to mix.

Suitable for use in the processing of all types of steel, including stainless, heat-resistant and high-alloyed grades, cast iron, aluminium, non-ferrous metals.

Recommendations for breeding:

1. For works up to -5 ºC, mixed with water at a ratio of 1:4 (1 part of concentrate and 4 parts of water).
2. For works up to -10 ºC, mixed with water at a ratio of 1:2.5 (1 part of concentrate and 2.5 parts of water).
3. At temperatures down to -20 ºC, mixed with water at a ratio of 1:1.3 (1 part of concentrate and 1.3 parts of water).

For example, concentrate intended for operation up to -20 ºC. is mixed with water in the ratio 1:1,3 (10kg of concentrate per 13kg of water). The volume of the ready working solution is 23 litres.
When working with a concentration much higher than the recommended norm (10%), it is necessary to use individual skin protection equipment.

ATTENTION!

Regularly adjust the working solution in the machines using a refractometer. Observe the concentration according to the supplier’s recommendations.

Fill the machine tools only with the working coolant solution, not with water!

Follow the link and see all the items in the category

Synthetic cutting fluid Defender-Ultra Winter can be bought in Kharkiv from the warehouse of Novohim Company or with delivery in Kyiv, Poltava, Sumy, Zaporizhzhia, Dnipro, Vinnytsia and all over Ukraine.

The Synthetic cutting fluid Defender Ultra Winter -20°C / Synthetic cutting fluid for machine tools Defender Ultra Winter message appeared first on Novohim.

Synthetic cutting fluid Defender Ultra M for copper, bronze and brass buy in the online store of chemicals Novohim.

Synthetic coolant for non-ferrous metals Defender Ultra M, in addition to its many advantages, was developed specifically for the processing of such metals as copper, bronze and brass and their alloys.

Our regular experience of working with metalworking companies provides us with information about the difficulties manufacturers face when machining metals such as copper. Namely, the fact that during processing, the coolant solution begins to change colour, work incorrectly, workers experience unwanted skin reactions, etc.

That is why Defender Ultra M metalworking coolant has special high quality inhibiting additives that allow for effective and safe processing of metals such as copper and its alloys, and other non-ferrous metals. In addition, the copper coolant is enhanced with bactericidal properties and is highly resistant to bacterial damage, even during prolonged equipment downtime. At the same time, Defender Ultra M metalworking coolant has excellent cleaning and lubricating properties.

t is also important to note the economic cost and reduction in the total cost of purchasing lubricants for production due to the extended service life of Ultra M synthetics.

Advantages of Defender Ultra M cutting fluid:

1. Cutting fluid composition is enhanced with special copper inhibiting additives
2. Efficiently and safely allows processing such metals as copper, bronze and brass and their alloys
3. Increased service life by 3 times, even when the machine is not in use.
4. Increased resistance to corrosion and fungal attack by 5 times.
5. Compatible with all types of metalworking equipment.
6. Works on water of any hardness.
7. Easy to mix.

Recommendations for dilution:

Pour Defender Ultra M Concentrate 0.3 litres or 0.5 litres (depending on the type of treatment) into 9,7-9,5 litres of water and mix thoroughly.

IMPORTANT: Do not pour water into the concentrate!

Regularly adjust the working solution in the machines using a refractometer. Observe the concentration in accordance with the supplier’s recommendations.

Refill the machines only with the working solution of the coolant, not with water!

Please note: The price of the working solution is 20 times cheaper than the price of the coolant concentrate (calculated for a concentration of 5%).

Types of treatment and recommended concentration of the working solution:

• Grinding-3% of the total
• Turning-4%
• Drilling-5%
• Milling-5
• Boring-5
• Honing-5%.

Follow the link to see all products in this category

Synthetic coolant Defender-Ultra M can be purchased in Kharkiv from Novohim’s warehouse or with delivery to Kyiv, Poltava, Sumy, Zaporizhzhia, Dnipro, Vinnytsia and throughout Ukraine.

The Synthetic cutting fluid Defender Ultra M / Cutting fluid for copper Defender Ultra M message appeared first on Novohim.

In metalworking

BIOL-UNIVERSAL-Winter cutting fluid can be bought in Kharkiv in the online shop of chemicals Novohim.

This cutting fluid as well as BIOL-UNIVERSAL cutting fluid is intended for use in metal machining. For clarification, the concentrate of this coolant is used for works in winter period down to -20 ºC.

Undoubtedly, one of the best developments for work at low temperatures is BIOL-U-WINTER cutting fluid. Firstly, it has excellent lubricating, highest anti-corrosion and antibacterial properties. Secondly, it does not contain sodium nitrite, chlorine and other harmful substances. And thirdly, it is suitable for work in unheated areas down to -20 ºC.

For obtaining a 5% working coolant solution:

1. When working down to -5 ºC, it is mixed with water at a ratio of 1:4 (1 part of concentrate and 4 parts of water)
2. For works down to -10 ºC, mixed with water in the ratio 1:2.5 (1 part of concentrate and 2.5 parts of water)
3. At temperatures down to – 20 ºC mixed with water in a ratio of 1:1.3 (1 part of concentrate and 1.3 parts of water)

For example, the concentrate is intended for use down to -20 °C. Mix with water in a ratio of 1:1.3 (10 kg of concentrate to 13 kg of water). The volume of the finished working solution is 23 litres.
When working with a concentration significantly higher than the recommended rate (10%), it is necessary to use personal protective equipment for the skin.

Buy Biol-U-Winter lubricant-coolant fluid in Kharkiv from Novohim Company warehouse and with delivery in Kyiv, Sumy, Zaporizhzhia, Poltava, Dnipro, Vinnytsia and all over Ukraine.

The Cutting fluid BIOL-UNIVERSAL-Winter message appeared first on Novohim.

Defender Ultra is a synthetic, water-miscible metalworking fluid concentrate designed for use on metal-cutting machine tools in both centralised circulation systems and local coolant supply. The product combines cooling, lubricating, cleaning and corrosion protection properties, ensuring stable performance of the working solution under real industrial conditions.

Unlike conventional oil-based emulsions, Defender Ultra is not only focused on machining efficiency, but also on cleaner machine operation, high biostability, stable solution performance, and reduced operational issues such as foaming, odour formation, deposits and system instability.

Advantages of Defender Ultra Metalworking Fluid

Using a synthetic metalworking fluid provides significant operational benefits:

• synthetic water-miscible metalworking fluid concentrate;
• high biostability under correct operating conditions;
• strong corrosion protection;
• effective cleaning properties;
• cleaner machine operation compared with conventional emulsion fluids;
• stable working solution;
• suitable for a wide range of machining operations;
• easy preparation and concentration control;
• suitable for both circulation systems and local applications.

Suitable Machining Operations

Defender Ultra is suitable for a wide range of metalworking operations where cooling efficiency, system cleanliness, solution stability and adequate lubrication are required.

Recommended applications:

• turning;
• milling;
• drilling;
• boring;
• grinding;
• honing;
• tool sharpening;
• gear cutting;
• bandsaw cutting.

The product is especially suitable for manufacturers who require a modern synthetic coolant rather than heavy oil-based fluids, offering stable performance, clean operation and simplified maintenance.

Suitable Materials

Defender Ultra can be used for machining:

• cast iron;
• carbon steels;
• medium and high alloy steels;
• stainless steels;
• aluminium;
• a range of non-ferrous metals and alloys, depending on the specific application.

For machining copper, brass or bronze, it is recommended to consider specialised products formulated specifically for non-ferrous materials.

How the Product Works

During machining, Defender Ultra forms a stable working solution that simultaneously cools the cutting zone, reduces friction and efficiently removes chips.

Thanks to its synthetic formulation, the fluid remains highly stable and helps prevent biological deposits from forming within the system.

Technical Specifications

Why Choose Defender Ultra

Selecting the correct metalworking fluid is not only about cooling performance. In practice, machine condition, coolant stability, system cleanliness, ease of maintenance, odour control, foaming behaviour, microbial resistance and corrosion protection are all equally important.

Defender Ultra has been developed specifically for these requirements. It delivers not only effective cutting-zone performance but also stable, predictable system operation over time.

Key Properties

Excellent cleaning performance

Defender Ultra ensures cleaner machine operation compared with conventional oil-based emulsions. This is essential where cleanliness, visibility, reduced deposits and easier maintenance are required.

Corrosion protection

The product contains a functional corrosion-inhibiting package that helps reduce corrosion risks on both machine components and workpieces when correct concentration and application procedures are followed.

High biostability

One of the most common issues in coolant systems is microbial growth, unpleasant odour, and fluid degradation.

Defender Ultra is formulated for high biostability and maintains performance when concentration and system hygiene are properly controlled.

Stable working solution

Its synthetic nature ensures a stable solution without the instability commonly associated with emulsion-based coolants.

Balanced performance

Defender Ultra provides a balanced combination of cooling, lubrication and cleanliness, making it suitable for a wide range of machining operations.

Where It Is Most Effective

Defender Ultra is particularly suitable where the following are required:

• versatility across machining operations;
• cleaner machine tool operation;
• stable coolant performance over time;
• easy concentration control;
• high biostability;
• corrosion protection;
• reduced maintenance issues in circulation systems.

Recommended Concentration

The working concentration depends on:

• machining type;
• material;
• cutting conditions;
• delivery system;
• water quality;
• system condition;
• cleanliness and corrosion protection requirements.

General guidance:

• low concentrations for light-duty operations;
• medium concentrations for standard machining;
• higher concentrations for heavy-duty operations, bandsawing, poor water quality or enhanced protection requirements.

Exact concentration should be confirmed through practical testing and manufacturer recommendations.

How to Prepare the Working Solution

To ensure stable performance, proper preparation is essential:

• use clean water;
• follow recommended concentration guidelines;
• do not mix with other fluids without compatibility testing;
• clean the system before switching products;
• monitor concentration during use.

Only working solution should be used for topping up machines — not plain water.

Important: the cost of the working solution is significantly lower than the concentrate (approximately 20× at 5% concentration).

Water Quality Requirements

Water quality strongly affects performance.

Important factors include:

• water hardness;
• mineral content;
• chemical stability;
• impurities.

Poor water quality may cause:

• unstable emulsions;
• sediment formation;
• foaming;
• reduced cleaning efficiency;
• weaker corrosion protection;
• reduced fluid lifespan.

Comparison with Conventional Emulsions

Compared with traditional emulsion coolants, Defender Ultra provides:

• cleaner system operation;
• reduced oil contamination;
• easier control of working concentration;
• improved stability;
• strong biostability;
• reduced risk of common system issues.

Defender Ultra vs Defender Ultra M

Defender Ultra is a universal synthetic coolant for general metalworking applications.

Defender Ultra M is a specialised formulation intended for non-ferrous metals, especially copper, brass and bronze.

The choice depends not on which is “better”, but on which is more suitable for the specific machining task.

When It May Not Be Suitable

Defender Ultra is not intended as a universal solution for extreme heavy-duty cutting conditions.

Where maximum extreme-pressure (EP) lubrication is required, specialised oil-based or dedicated high-performance fluids may be more appropriate.

Its strength lies in a balanced formulation:

• cooling;
• adequate lubrication;
• cleanliness;
• corrosion protection;
• biostability;
• operational stability.

Who It Is Suitable For

Defender Ultra is suitable if you need:

• synthetic machine coolant;
• water-miscible metalworking concentrate;
• coolant for turning, milling, drilling or grinding;
• coolant for bandsaw machines;
• corrosion-protective coolant;
• biostable circulation system fluid;
• a modern alternative to emulsion-based coolants.

Follow the link to see all products of this category

FAQ

What is Defender Ultra?

Defender Ultra is a synthetic water-miscible metalworking-fluid concentrate for metalworking, intended for preparing a working solution and use on metal-cutting machines.

What operations is Defender Ultra suitable for?

The product is suitable for turning, milling, drilling, boring, grinding, honing, gear cutting, tool sharpening, and bandsaw machining.

What metals can Defender Ultra be used for?

Defender Ultra is used for cast iron, steels, stainless steel, aluminum, and a range of non-ferrous metals, depending on the specific task.

Is Defender Ultra suitable for circulating systems?

Yes. The product is designed for stable operation in circulating systems and, when maintained correctly, provides good operational stability.

How does Defender Ultra differ from emulsion metalworking fluids?

The synthetic nature of Defender Ultra provides cleaner machine operation, good cleaning properties, high biostability, and a stable working solution.

How does Defender Ultra differ from Defender Ultra M?

Defender Ultra is a universal product for a wide range of operations, while Defender Ultra M is more suitable where specialization for non-ferrous metals is important.

Can Defender Ultra be mixed with other metalworking fluids?

This should not be done without checking compatibility. Mixing different products can lead to solution instability and system problems.

How do I select the correct Defender Ultra concentration?

The exact concentration depends on the operation, metal, water quality, and operating regime. Real application conditions must be considered for accurate selection

The Synthetic cutting fluid Defender Ultra / Cutting fluid synthetics for machine Defender Ultra message appeared first on Novohim.

In metal working

Buy Biol Eco-GREAM in Kharkiv at the Internet-shop of chemical agents Novohim.

This cutting fluid as well as Coolant Biol-ECO, is designed for use in machining of metal. To clarify, the concentrate of this coolant is used for winter works down to -20 ºC.

Undoubtedly, one of the best developments for work at low temperatures is coolant “BIOL-ECO-ZIMA”. Firstly, it has excellent lubricating, the highest anticorrosive and antibacterial properties. Secondly, it does not contain sodium nitrite, chlorine and other harmful substances. Thirdly, it is suitable for works in unheated rooms down to -20 °C.

To obtain 5% of working solution of coolant:

1. For works up to -5 ºC mix with water in the ratio of 1:4 (1 part of concentrate and 4 parts of water)
2. For works down to -10 ºC mix with water in the ratio of 1:2.5 (1 part of concentrate and 2.5 parts of water)
3. At temperature down to -20 ºC mixed with water in ratio 1:1,3 (1 part of concentrate and 1,3 parts of water)

Lubricant-coolant Biol-ECO-Winter buy in Kharkiv from Novohim Company warehouse and with delivery in Kyiv, Sumy, Zaporizhzhia, Poltava, Dnipro, Vinnytsia and all over Ukraine.

The Lubricant-coolant fluid BIOL-ECO-ZIMA message appeared first on Novohim.

This cutting fluid increases the quality of metal surface treatment up to 35%. It works with such metals as aluminum, titanium, steel and cast iron. Moreover, it is specially designed for machining aluminum parts.

This lubricant-coolant fluid is also available in a winter version, namely Cutting fluid Biol-ECO-ZIMA. To clarify, designed to work in unheated shops. Withstands temperatures down to -20C.

Example of Biol ECO coolant application:

Aluminum parts machining company

Initial situation:
An aluminum processing company was interested in testing with Biol Eco cutting fluid. This is because they had problems using their previous cutting fluid. Firstly, we faced the issue of worker allergies. Secondly, the extremely short service life of the coolant and thirdly, the high consumption of concentrate.

The solution:
First of all, from a tank for centralized preparation of coolant solution, each machine operator poured the working solution into the machines. To clarify, on which aluminum pistons were machined. Full control of the coolant concentration was ensured. Then a 2% working solution of Biol-Eco cutting fluid was prepared for refilling. Tap water was used to prepare the working coolant solution.

The result:
As a result, Biol Eco cutting fluid showed excellent performance results. Biol Eco lubricant-coolant fluid has already lasted more than two years at this plant without replacement, which has significantly reduced concentrate consumption. The customer reported excellent quality of aluminum processing and significant improvement of production cleanliness.

Intended for metal processing:

1. Aluminum
2. Titanium
3. Cast iron
4. Medium and high alloy steels
5. Stainless steel.

Recommended concentration of the working solution:

• Turning -3-5%
• Drilling -5%
• Hobbing -5-7%
• Thread rolling -5-7%
• Milling -5%
• Boring -5%
• Grinding tools 5%

See all products in this category by clicking here

Lubricant-Coolant fluid Biol Eco is possible to buy in the Company Novohim from a warehouse in Kharkiv or with delivery in Kyiv, Poltava, Zaporizhzhia, Dnipro, Vinnytsia, Sumy and all over Ukraine.

The Lubricant-cooling fluid Biol Eco / Cutting fluid Biol Eco message appeared first on Novohim.

Cutting fluid “BIOL-LEMON” buy in the online store of chemicals Novohim. Concentrate for lathes, milling and grinding machines.

Recommended for use on operations blade and abrasive machining cast iron, low-alloy steel in a particularly dirty manufacturing conditions. Cooling and lubricanting fluid “BIOL L” refers to water-miscible synthetic coolants produced according to TU U 20.5-24346849-010:2015 This product is used by machine-building and metal-working enterprises.

Properties of cutting fluid for lathes:

1. High economy: only 2-5% concentrate is required to prepare the working solution.
2. Excellent biopersistence (suppresses reproduction of fungi, bacteria and mold in the working solution).
3. Ease of use: Biol Limon concentrate is instantly dissolved in water without heating and long stretching.
4. Effective over a wide range of water hardness – from 0 to 21 eq/l.
5. Coolant preparation of the working solution.

It is recommended to prepare the working solution of liquid coolant in a centralized manner, in a separate container. Entrust this duty to one responsible person. Prior to preparation one should stir up BIOL-Lemon concentrate.
BIOL-Lemon fluid concentrate is added to a clean container, where the required amount of water is already poured, and stirred again for 10-20 seconds.
Standard working solution has a concentration of 5%
-0.5 litres of concentrate per 9.5 litres of water and then mix thoroughly.

IMPORTANT: only refill machines with the working solution of the coolant, not water. Correctness of the working solution preparation shall be performed with the help of a refractometer.

It is recommended to store prepared working solution of Biol for machine-tools at temperatures above zero.

The price of Biol-Limon allows to buy it for any metalworking operations.

Cutting fluid Biol-Lemon can be purchased in Kharkiv from Novohim company warehouse and with delivery in Kyiv, Dnipro, Zaporizhzhia, Sumy, Poltava, Vinnytsia and all over Ukraine.

The Lubricant-cooling fluid Biol Lemon / Cutting fluid Biol Lemon message appeared first on Novohim.

Biol Universal is a synthetic water-miscible metalworking fluid supplied as a concentrate for preparing working solutions. It is a universal synthetic metalworking fluid of the standard class for most typical metalworking operations.
Within the three-level classification economy — standard — premium, this product belongs to the standard class. This means that Biol Universal is intended for everyday industrial use where normal lubricating properties, low foaming, stable working-solution performance, corrosion protection, and suitability for a wide range of standard machining operations are required.
Biol Universal is not an economy-class product with minimal functionality, and it is not a narrowly specialized premium fluid for all heavy-duty machining conditions. It is a practical universal synthetic fluid for standard production tasks.
In this case, the word “universal” means that the product is suitable for a wide range of typical machining operations when the concentration is selected correctly and the working solution is maintained properly. It does not mean that the product is equally suitable for any metal, any machining regime, or any operating condition without limitations.

Purpose

Biol Universal is used for:

• preparing working metalworking-fluid solutions for mechanical metalworking;
• drilling;
• turning;
• milling;
• grinding;
• boring;
• tool sharpening;
• polishing;
• honing;
• other typical metalworking operations

Where it is used

Biol Universal is used:

• at machine-building enterprises;
• in metalworking shops;
• on drilling, turning, milling, and grinding machines;
• in production where one universal synthetic fluid is needed for standard operations;
• in circulating or local feed systems, provided that the working solution is properly maintained.

Recommended concentration of the working solution:

1. Grinding-3-5%
2. Turning-5%
3. Drilling-5%
4. Deep drilling-7-10%
5. Drawing 7-10%
6. Milling-5%
7. Boring-5-7%
8. Grinding tools 5-7%
9. Polishing-3-5%
10. Honing 7-10%

Main properties

Biol Universal is a synthetic standard-class metalworking fluid. Its main properties are:

• synthetic water-miscible formulation;
• concentrate for preparing a working solution;
• high lubricating properties;
• low foaming;
• free from chlorine-containing and sulfur-containing additives, nitrites, and phenols;
• resistance to corrosion and biological contamination when recommended concentrations are maintained;
• easy mixing with water;
• suitability for a wide range of typical metalworking operations

Suitable materials

Biol Universal is suitable for machining:

• ferrous metals;
• cast iron;
• low-alloy steels;
• high-alloy steels;
• stainless steels;
• certain typical operations on aluminum, provided that the machining conditions and concentration are selected correctly.

Important clarification on water and operation

As a synthetic metalworking fluid, Biol Universal is more stable in operation and less dependent on water quality than oil-containing emulsion metalworking fluids. This is one of the practical advantages of a synthetic standard-class product.

At the same time, water quality still affects:

• working-solution stability;
• foaming level;
• machining cleanliness;
• service life of the working bath;
• overall system stability.

When using the product, it is necessary to control:

• working-solution concentration;
• water quality;
• system condition;
• make-up conditions;
• suitability of the product for the specific operation and machined material.

Who this metalworking fluid is suitable for

Biol Universal is suitable for enterprises and production facilities that need:

• a universal synthetic metalworking fluid for typical machining operations;
• one working fluid for everyday industrial use;
• a standard-class metalworking fluid without moving into the minimum-cost or narrowly specialized segment;
• a low-foaming synthetic metalworking-fluid concentrate;
• a practical solution for turning, milling, drilling, and grinding operations

Advantages

1. universal synthetic metalworking fluid of the standard class;
2. broad range of typical machining applications;
3. clear recommended concentrations;
4. low foaming;
5. high lubricating properties;
6. lower dependence on water quality compared with oil-containing emulsion metalworking fluids;
7. resistance to corrosion and biological contamination when used correctly;
8. suitability for daily industrial operation.

Follow this link to see all products from this category

Conclusion

Biol Universal is a synthetic water-miscible metalworking-fluid concentrate of the standard class for most typical metalworking operations. The product is suitable for everyday industrial use when a universal synthetic working fluid with normal lubricating properties, low foaming, and clear working concentrations is required.
The strength of Biol Universal lies in its practical balance of versatility, stability, and working performance. As a synthetic metalworking fluid, it operates more stably and is less dependent on water quality than oil-containing emulsion metalworking fluids. For effective use, concentration, system condition, water quality, and operating conditions must be controlled.

FAQ

What does it mean that Biol Universal belongs to the standard class?

It means that the product is intended for most typical industrial metalworking tasks and occupies the main working position between economy and premium classes.

Is Biol Universal a universal metalworking fluid “for everything”?

No. It is a universal synthetic metalworking fluid for a wide range of typical machining operations when the concentration is selected correctly and the working solution is maintained properly.

In what form is the product supplied?

The product is supplied as a concentrate.

What operations is Biol Universal suitable for?

It is suitable for drilling, turning, milling, grinding, boring, tool sharpening, polishing, honing, and other typical metalworking operations.

Does water quality matter when using this metalworking fluid?

Yes, but as a synthetic metalworking fluid, Biol Universal is less dependent on water quality than oil-containing emulsion metalworking fluids. Water still affects foaming, working-solution stability, and service life.

How should Biol Universal be stored?

In the manufacturer’s original container at temperatures above 0 °C

The Biol Universal Metalworking Fluid / Cutting fluid Biol U message appeared first on Novohim.

You can buy synthetic cutting fluid Biol in the online store of chemicals Novohim. 

TOP-6 properties of BIOL lubricant-coolant:

1. Possesses sufficient lubricating properties.
2. Recommended for machining of low- and medium-alloyed steels, cast iron.
3. Resistant to corrosion and biodegradation if recommended concentrations are maintained.
4. Recommended operations: turning, milling, drilling, grinding.
5. Thanks to its advanced additive package, this coolant maintains its stability and performance even when used with hard water, offering a distinct advantage over traditional emulsions.
6. Easily miscible.

Recommendations for dilution:

Biol Concentrate 0.5 litres or 0.7 litres of coolant ( according to the type of treatment) is poured into 9.5-9.3 litres of water respectively and mixed thoroughly.

IMPORTANT: do NOT pour water into the concentrate!

Regularly adjust the working solution in the machines with a refractometer. Do not allow the concentration to fall below the permissible value.

Fill machines only with the working solution of the coolant and not with water.

Types of machining and recommended concentration of working solution:

• Grinding-5%.
• Turning-5%.
• Drilling-5-7%
• Milling-5-7%
• Boring-5-7%
• Honing-5-7%

Follow this link to see all items in this category

Cutting fluid Biol can be bought in Kharkiv from the warehouse of Novohim Company or with delivery in Kyiv, Poltava, Sumy, Zaporizhzhia, Dnipro, Vinnytsia and all over Ukraine.

The Lubricant-coolant Biol / Cutting fluid Biol message appeared first on Novohim.