Cutting fluid for stone Defender Stone you can buy in Ukraine in the online store of chemicals Novohim. For processing and cutting all kinds of stone, including superhard rocks.

First of all it is applicable to work on usual machines. Secondly, it is recommended for CNC machines, automatic and semi-automatic machines. And thirdly, the coolant for stone to buy is designed to work on both low-speed and high-speed machines.

It is noteworthy that Defender “Stone” concentrate is diluted with regular tap water.

The synthetic water-mixable coolant for marble and granite Defender Stone works as a 5% working solution. It is easy to prepare the working solution. Method of mixing concentrate of coolant for stone with water in the ratio of 0.5 litres of concentrate per 9.5 litres of water and then mix thoroughly.

Depending on the hardness of the stone you can increase the concentration of coolant in the solution up to 10%.

Advantages of DEFENDER “Stone” lubricant and coolant

1. Fast and easy preparation of the working solution (dilution) in common water not requiring special preparation
2. Possesses unique lubricating properties which allow you to significantly increase the wear resistance of your cutting tools.
3. Does not change the properties of stone and its color
4. Low foaming
5. Recommended for hard stone applications
6. Long working life of working solution in machines, which does not require the introduction of additional additives and bactericides
7. Long shelf life of the concentrate
8. Environmentally friendly with no sulphur- and chlorine-containing additives, nitrites and phenols.

Such cutting fluid can be purchased for machining:

• Marble and granite
• Other hard stone species
• Ceramics
• Glass
• Examples of applications for glass and stone coolants:
• Hard stone detailing company.

Initial situation: 
The company had problems with quality processing and cutting stone. Also the consumption of cutting tools exceeded all possible limits. A request was made to buy Defender Stone cutting fluid for stone and test it within a month.  As a result, the goal of the test was to find a coolant that would provide high quality machining as well as cutting tool safety.

The solution:
The working solution of the coolant was prepared in 5% concentration in a special tank for the preparation of the working solution. Then, from this tank, the working solution of coolant was poured into the machines where the parts made of hard stone (marble and granite) were machined.  It should be noted that water for preparation of working solution was tap water. A 3% solution of Defender “Stone” cutting fluid was prepared for refilling the machines. It was also ensured that the concentration of coolant was checked with a refractometer.

Result:
To summarize, the Defender “Stone” cutting fluid showed excellent quality of machining hard stone parts as well as high lubricating properties. In addition, the customer reported that the Defender “Stone” coolant had improved tool integrity by more than 60%.

As the above example shows, the price of the stone cutting fluid justifies its use at the company.

All cooling lubricants can be viewed here

Cutting fluid Defender “Stone” you can buy in the warehouse in Kharkiv and with delivery in Kyiv, Poltava, Zaporizhzhia, Dnipro, Sumy, Kherson, Vinnytsia and all over Ukraine.

The Cutting fluid Defender Stone / Lubricant-cooling fluid Defender Stone message appeared first on Novohim.