Synthetic cutting fluid Defender Expert for machine tools buy in the online store of chemicals Novohim.

Defender Expert cutting fluid is a modern technological fluid for metalworking of ferrous and non-ferrous metals (including copper). Thanks to effective additives in its composition, this coolant has high anti-corrosion properties, moderate lubricating properties and strong cooling capacity.

Advantages of Defender Expert cutting fluid:

1. Economical – working solution with concentration of 3%.
2. The composition of Defender Expert metal coolant is reinforced with additives of high European quality.
3. Suitable for processing of non-ferrous metals including copper.
4. Increased resistance to corrosion and fungal attack by 5 times.
5. Suitable for centralised systems and machines with circulation.
6. Compatible with all types of metalworking equipment.
7. Works on water of any hardness.
8. Easy to mix.

In addition, Defender Expert cutting fluid is also foam-free. This synthetic coolant removes fine swarf and abrasive wear products. Suitable for use on all types of steel, including stainless, heat-resistant and high-alloyed grades, cast iron, aluminium, non-ferrous metals.

Recommendations for breeding:

Lubricant and coolant Defender Expert concentrate 0.3 litres (depending on the type of treatment) into 9.7 litres of water and mix thoroughly.

IMPORTANT: Do not pour water into the concentrate!

Regularly adjust the working solution in the machines using a refractometer. Adhere to the concentration according to the supplier’s recommendations.

Fill the machines only with the working coolant solution, not with water!

Please note: the price of working solution is 20 times cheaper than the price of coolant concentrate (calculation for 5% concentration).

Types of machining and recommended concentration of the working solution:

• Grinding-3%
• Turning-3%
• Drilling-3%
• Milling-3%
• Boring-3%
• Honing-3%

Follow the link to see all products in this category

Synthetic cutting fluid Defender Expert can be bought in Kharkiv from the warehouse of Novohim Company or with delivery in Kyiv, Poltava, Sumy, Zaporizhzhia, Dnipro, Vinnytsia and all over Ukraine.

The Synthetic cutting fluid Defender Expert / Synthetic cutting fluid for machine tool Defender Expert message appeared first on Novohim.

Synthetic cutting fluid Defender Ultra Winter for machine tools buy in Novohim online shop of chemicals.

Defender-Ultra ZIMA -20°C synthetic machine tool coolant has a unique formulation and was developed specifically as a cutting fluid that has an extended service life even under extreme production conditions. Defender-Ultra ZIMA is specially designed to work in unheated workshops where the temperature can drop to -20°C. In addition, this technological fluid for metalworking has enhanced bactericidal abilities and high resistance to bacterial damage, excellent washing and lubricating properties.

It is also important to note the economical consumption and reduction in overall coolant procurement costs for production due to the extended application life of Ultra synthetics.

Advantages of Defender-Ultra Winter cutting fluid:

1. Distinctive feature – 3 times longer service life even when the equipment is idle.
2. Ability to work at low temperatures down to -20C.
3. The composition of Ultra metal coolant is reinforced with synthetic components of high European quality.
4. The resistance to corrosion and fungal attack is increased by 5 times.
5. Recommended operations: turning, milling, drilling, grinding.
6. Compatible with all types of metalworking equipment.
7. Works on water of any hardness.
8. Easy to mix.

Suitable for use in the processing of all types of steel, including stainless, heat-resistant and high-alloyed grades, cast iron, aluminium, non-ferrous metals.

Recommendations for breeding:

1. For works up to -5 ºC, mixed with water at a ratio of 1:4 (1 part of concentrate and 4 parts of water).
2. For works up to -10 ºC, mixed with water at a ratio of 1:2.5 (1 part of concentrate and 2.5 parts of water).
3. At temperatures down to -20 ºC, mixed with water at a ratio of 1:1.3 (1 part of concentrate and 1.3 parts of water).

For example, concentrate intended for operation up to -20 ºC. is mixed with water in the ratio 1:1,3 (10kg of concentrate per 13kg of water). The volume of the ready working solution is 23 litres.
When working with a concentration much higher than the recommended norm (10%), it is necessary to use individual skin protection equipment.

ATTENTION!

Regularly adjust the working solution in the machines using a refractometer. Observe the concentration according to the supplier’s recommendations.

Fill the machine tools only with the working coolant solution, not with water!

Follow the link and see all the items in the category

Synthetic cutting fluid Defender-Ultra Winter can be bought in Kharkiv from the warehouse of Novohim Company or with delivery in Kyiv, Poltava, Sumy, Zaporizhzhia, Dnipro, Vinnytsia and all over Ukraine.

The Synthetic cutting fluid Defender Ultra Winter -20°C / Synthetic cutting fluid for machine tools Defender Ultra Winter message appeared first on Novohim.

Defender Oil Strong application

Universal mineral cutting fluid Defender Oil Strong with a high oil content buy in the online store of chemicals Novohim.

Defender Oil Strong, a high oil content water-miscible oil coolant, was developed as a universal emulsion for all types of steel, including heat-resistant steels, cast iron, aluminium and non-ferrous metals.

The Defender OIl Strong metalworking cutting fluid has a package of professional additives of European quality that allows for efficient and safe processing of ferrous and non-ferrous metals. In addition, the cutting fluid is enhanced with bactericidal properties and is highly resistant to bacterial damage, even during prolonged equipment downtime. At the same time, Defender Oil Strong oil-based metalworking cutting fluid has excellent lubricating and anti-corrosion properties.

The advantages of Defender Oil Strong cutting fluid:

1. The cutting fluid composition is reinforced with special European additives.
2. It enables efficient and safe processing of ferrous and non-ferrous metals.
3. The lubricating properties of the coolant have been increased by 3 times.
4. Enhanced resistance to corrosion and fungal attack.
5. Compatible with all types of metalworking equipment.
6. It works on water of any hardness.
7. Easy to mix.

Breeding recommendations:

Before dilution, the coolant concentrate must be thoroughly stirred. Defender Oil Strong Concentrate 0.5 litres (depending on the type of treatment) is poured into 9,5 litres of hot water and mixed thoroughly using a mixer. Specifically, it works at a 5% concentration of the working solution.

Also note that all oil-based emulsions are highly sensitive to water quality. We therefore recommend that, if the water used to prepare the working solution is hard, you soften it using soda ash. Afterwards, stir thoroughly until the soda ash has dissolved completely.

IMPORTANT! To prepare the DEFENDER STRONG working solution correctly, you must strictly follow the manufacturer’s recommendations.

IMPORTANT! Pouring water into concentrate is FORBIDDEN!

Regularly adjust the working solution in the machines using a refractometer. Observe the concentration in accordance with the supplier’s recommendations.

Refill the machines only with coolant solution, not water!

Store the cutting fluid at a temperature of +5°C and above.

Please note: The price of the working solution is 20 times cheaper than the price of the coolant concentrate (calculated for a concentration of 5%).

Types of treatment and recommended concentration of the working solution:

• Grinding-3%
• Turning-5%
• Drilling-5%
• Deep drilling-5%.
• Milling-5
• Boring-5%.
• Honing-5%

Follow the link to see all products in this category

You can buy Defender Oil Strong oil-based water-miscible coolant in Kharkiv from Novohim warehouse or with delivery in Kyiv, Poltava, Sumy, Zaporizhzhia, Dnipro, Vinnytsia and throughout Ukraine.

The Defender Oil Strong oil-based water-miscible cutting fluid message appeared first on Novohim.

Synthetic cutting fluid Defender Ultra M for copper, bronze and brass buy in the online store of chemicals Novohim.

Synthetic coolant for non-ferrous metals Defender Ultra M, in addition to its many advantages, was developed specifically for the processing of such metals as copper, bronze and brass and their alloys.

Our regular experience of working with metalworking companies provides us with information about the difficulties manufacturers face when machining metals such as copper. Namely, the fact that during processing, the coolant solution begins to change colour, work incorrectly, workers experience unwanted skin reactions, etc.

That is why Defender Ultra M metalworking coolant has special high quality inhibiting additives that allow for effective and safe processing of metals such as copper and its alloys, and other non-ferrous metals. In addition, the copper coolant is enhanced with bactericidal properties and is highly resistant to bacterial damage, even during prolonged equipment downtime. At the same time, Defender Ultra M metalworking coolant has excellent cleaning and lubricating properties.

t is also important to note the economic cost and reduction in the total cost of purchasing lubricants for production due to the extended service life of Ultra M synthetics.

Advantages of Defender Ultra M cutting fluid:

1. Cutting fluid composition is enhanced with special copper inhibiting additives
2. Efficiently and safely allows processing such metals as copper, bronze and brass and their alloys
3. Increased service life by 3 times, even when the machine is not in use.
4. Increased resistance to corrosion and fungal attack by 5 times.
5. Compatible with all types of metalworking equipment.
6. Works on water of any hardness.
7. Easy to mix.

Recommendations for dilution:

Pour Defender Ultra M Concentrate 0.3 litres or 0.5 litres (depending on the type of treatment) into 9,7-9,5 litres of water and mix thoroughly.

IMPORTANT: Do not pour water into the concentrate!

Regularly adjust the working solution in the machines using a refractometer. Observe the concentration in accordance with the supplier’s recommendations.

Refill the machines only with the working solution of the coolant, not with water!

Please note: The price of the working solution is 20 times cheaper than the price of the coolant concentrate (calculated for a concentration of 5%).

Types of treatment and recommended concentration of the working solution:

• Grinding-3% of the total
• Turning-4%
• Drilling-5%
• Milling-5
• Boring-5
• Honing-5%.

Follow the link to see all products in this category

Synthetic coolant Defender-Ultra M can be purchased in Kharkiv from Novohim’s warehouse or with delivery to Kyiv, Poltava, Sumy, Zaporizhzhia, Dnipro, Vinnytsia and throughout Ukraine.

The Synthetic cutting fluid Defender Ultra M / Cutting fluid for copper Defender Ultra M message appeared first on Novohim.

In metalworking

BIOL-UNIVERSAL-Winter cutting fluid can be bought in Kharkiv in the online shop of chemicals Novohim.

This cutting fluid as well as BIOL-UNIVERSAL cutting fluid is intended for use in metal machining. For clarification, the concentrate of this coolant is used for works in winter period down to -20 ºC.

Undoubtedly, one of the best developments for work at low temperatures is BIOL-U-WINTER cutting fluid. Firstly, it has excellent lubricating, highest anti-corrosion and antibacterial properties. Secondly, it does not contain sodium nitrite, chlorine and other harmful substances. And thirdly, it is suitable for work in unheated areas down to -20 ºC.

For obtaining a 5% working coolant solution:

1. When working down to -5 ºC, it is mixed with water at a ratio of 1:4 (1 part of concentrate and 4 parts of water)
2. For works down to -10 ºC, mixed with water in the ratio 1:2.5 (1 part of concentrate and 2.5 parts of water)
3. At temperatures down to – 20 ºC mixed with water in a ratio of 1:1.3 (1 part of concentrate and 1.3 parts of water)

For example, the concentrate is intended for use down to -20 °C. Mix with water in a ratio of 1:1.3 (10 kg of concentrate to 13 kg of water). The volume of the finished working solution is 23 litres.
When working with a concentration significantly higher than the recommended rate (10%), it is necessary to use personal protective equipment for the skin.

Buy Biol-U-Winter lubricant-coolant fluid in Kharkiv from Novohim Company warehouse and with delivery in Kyiv, Sumy, Zaporizhzhia, Poltava, Dnipro, Vinnytsia and all over Ukraine.

The Cutting fluid BIOL-UNIVERSAL-Winter message appeared first on Novohim.

Defender Ultra is a synthetic, water-miscible metalworking fluid concentrate designed for use on metal-cutting machine tools in both centralised circulation systems and local coolant supply. The product combines cooling, lubricating, cleaning and corrosion protection properties, ensuring stable performance of the working solution under real industrial conditions.

Unlike conventional oil-based emulsions, Defender Ultra is not only focused on machining efficiency, but also on cleaner machine operation, high biostability, stable solution performance, and reduced operational issues such as foaming, odour formation, deposits and system instability.

Advantages of Defender Ultra Metalworking Fluid

Using a synthetic metalworking fluid provides significant operational benefits:

• synthetic water-miscible metalworking fluid concentrate;
• high biostability under correct operating conditions;
• strong corrosion protection;
• effective cleaning properties;
• cleaner machine operation compared with conventional emulsion fluids;
• stable working solution;
• suitable for a wide range of machining operations;
• easy preparation and concentration control;
• suitable for both circulation systems and local applications.

Suitable Machining Operations

Defender Ultra is suitable for a wide range of metalworking operations where cooling efficiency, system cleanliness, solution stability and adequate lubrication are required.

Recommended applications:

• turning;
• milling;
• drilling;
• boring;
• grinding;
• honing;
• tool sharpening;
• gear cutting;
• bandsaw cutting.

The product is especially suitable for manufacturers who require a modern synthetic coolant rather than heavy oil-based fluids, offering stable performance, clean operation and simplified maintenance.

Suitable Materials

Defender Ultra can be used for machining:

• cast iron;
• carbon steels;
• medium and high alloy steels;
• stainless steels;
• aluminium;
• a range of non-ferrous metals and alloys, depending on the specific application.

For machining copper, brass or bronze, it is recommended to consider specialised products formulated specifically for non-ferrous materials.

How the Product Works

During machining, Defender Ultra forms a stable working solution that simultaneously cools the cutting zone, reduces friction and efficiently removes chips.

Thanks to its synthetic formulation, the fluid remains highly stable and helps prevent biological deposits from forming within the system.

Technical Specifications

Why Choose Defender Ultra

Selecting the correct metalworking fluid is not only about cooling performance. In practice, machine condition, coolant stability, system cleanliness, ease of maintenance, odour control, foaming behaviour, microbial resistance and corrosion protection are all equally important.

Defender Ultra has been developed specifically for these requirements. It delivers not only effective cutting-zone performance but also stable, predictable system operation over time.

Key Properties

Excellent cleaning performance

Defender Ultra ensures cleaner machine operation compared with conventional oil-based emulsions. This is essential where cleanliness, visibility, reduced deposits and easier maintenance are required.

Corrosion protection

The product contains a functional corrosion-inhibiting package that helps reduce corrosion risks on both machine components and workpieces when correct concentration and application procedures are followed.

High biostability

One of the most common issues in coolant systems is microbial growth, unpleasant odour, and fluid degradation.

Defender Ultra is formulated for high biostability and maintains performance when concentration and system hygiene are properly controlled.

Stable working solution

Its synthetic nature ensures a stable solution without the instability commonly associated with emulsion-based coolants.

Balanced performance

Defender Ultra provides a balanced combination of cooling, lubrication and cleanliness, making it suitable for a wide range of machining operations.

Where It Is Most Effective

Defender Ultra is particularly suitable where the following are required:

• versatility across machining operations;
• cleaner machine tool operation;
• stable coolant performance over time;
• easy concentration control;
• high biostability;
• corrosion protection;
• reduced maintenance issues in circulation systems.

Recommended Concentration

The working concentration depends on:

• machining type;
• material;
• cutting conditions;
• delivery system;
• water quality;
• system condition;
• cleanliness and corrosion protection requirements.

General guidance:

• low concentrations for light-duty operations;
• medium concentrations for standard machining;
• higher concentrations for heavy-duty operations, bandsawing, poor water quality or enhanced protection requirements.

Exact concentration should be confirmed through practical testing and manufacturer recommendations.

How to Prepare the Working Solution

To ensure stable performance, proper preparation is essential:

• use clean water;
• follow recommended concentration guidelines;
• do not mix with other fluids without compatibility testing;
• clean the system before switching products;
• monitor concentration during use.

Only working solution should be used for topping up machines — not plain water.

Important: the cost of the working solution is significantly lower than the concentrate (approximately 20× at 5% concentration).

Water Quality Requirements

Water quality strongly affects performance.

Important factors include:

• water hardness;
• mineral content;
• chemical stability;
• impurities.

Poor water quality may cause:

• unstable emulsions;
• sediment formation;
• foaming;
• reduced cleaning efficiency;
• weaker corrosion protection;
• reduced fluid lifespan.

Comparison with Conventional Emulsions

Compared with traditional emulsion coolants, Defender Ultra provides:

• cleaner system operation;
• reduced oil contamination;
• easier control of working concentration;
• improved stability;
• strong biostability;
• reduced risk of common system issues.

Defender Ultra vs Defender Ultra M

Defender Ultra is a universal synthetic coolant for general metalworking applications.

Defender Ultra M is a specialised formulation intended for non-ferrous metals, especially copper, brass and bronze.

The choice depends not on which is “better”, but on which is more suitable for the specific machining task.

When It May Not Be Suitable

Defender Ultra is not intended as a universal solution for extreme heavy-duty cutting conditions.

Where maximum extreme-pressure (EP) lubrication is required, specialised oil-based or dedicated high-performance fluids may be more appropriate.

Its strength lies in a balanced formulation:

• cooling;
• adequate lubrication;
• cleanliness;
• corrosion protection;
• biostability;
• operational stability.

Who It Is Suitable For

Defender Ultra is suitable if you need:

• synthetic machine coolant;
• water-miscible metalworking concentrate;
• coolant for turning, milling, drilling or grinding;
• coolant for bandsaw machines;
• corrosion-protective coolant;
• biostable circulation system fluid;
• a modern alternative to emulsion-based coolants.

Follow the link to see all products of this category

FAQ

What is Defender Ultra?

Defender Ultra is a synthetic water-miscible metalworking-fluid concentrate for metalworking, intended for preparing a working solution and use on metal-cutting machines.

What operations is Defender Ultra suitable for?

The product is suitable for turning, milling, drilling, boring, grinding, honing, gear cutting, tool sharpening, and bandsaw machining.

What metals can Defender Ultra be used for?

Defender Ultra is used for cast iron, steels, stainless steel, aluminum, and a range of non-ferrous metals, depending on the specific task.

Is Defender Ultra suitable for circulating systems?

Yes. The product is designed for stable operation in circulating systems and, when maintained correctly, provides good operational stability.

How does Defender Ultra differ from emulsion metalworking fluids?

The synthetic nature of Defender Ultra provides cleaner machine operation, good cleaning properties, high biostability, and a stable working solution.

How does Defender Ultra differ from Defender Ultra M?

Defender Ultra is a universal product for a wide range of operations, while Defender Ultra M is more suitable where specialization for non-ferrous metals is important.

Can Defender Ultra be mixed with other metalworking fluids?

This should not be done without checking compatibility. Mixing different products can lead to solution instability and system problems.

How do I select the correct Defender Ultra concentration?

The exact concentration depends on the operation, metal, water quality, and operating regime. Real application conditions must be considered for accurate selection

The Synthetic cutting fluid Defender Ultra / Cutting fluid synthetics for machine Defender Ultra message appeared first on Novohim.

Defender “Standard”- semi-synthetic cutting fluid can be purchased from the warehouse of the online store of chemicals in Kharkiv.

Semi-synthetic lubricant-coolant fluid Standard has a balanced composition. Namely, the content of high-quality oil, which allows excellent performance of lubricating functions of technological fluid and at the same time provides cleanliness of the working area and details.

It is used for machining:

• copper
• bronze and titanium
• aluminium and their alloys
• iron products
• conventional grades of steel.

Recommendations for use

Before dilution, the coolant concentrate must be thoroughly stirred.Metal cutting fluid Defender “Standard” is suitable for any operations of machining and grinding with the concentration of the working fluid from 3% to 5%.

Advantages of cutting fluid Defender “Standard”:

1. Easy and quick preparation of the working solution (dilution) in common water that does not require special preparation
2. Has high lubricating and corrosion protection properties
3. Increases productivity and improves surface finish quality by up to 50%
4. Provides preservation of cutting tools by 1.5-2 times
5. Long life of the working solution in the machines, which does not require the introduction of additional additives and bactericides.
6. High concentration, which greatly reduces the consumption of working fluid.
7. Contains no nitrite, chlorine, formaldehyde, which meets the requirements of environmental protection.
8. Low foaming
9. Long shelf life of the concentrate.

The price of semi-synthetic cutting fluid Defender “STANDARD” may change depending on the product packaging.

Store the coolant at a temperature of +5°C or above!

Follow this link to see all products in this category

Read here how to change the cutting fluid correctly

Buy cutting fluid Defender “STANDARD” in Kharkiv and with delivery in Kyiv, Zaporizhzhia, Poltava, Sumy, Dnipro, Kherson, Vinnytsia and all over Ukraine.

The Lubricant-coolant fluid Defender Standard / Cutting fluid Defender Standard message appeared first on Novohim.

Lubricant for formwork Defender Oil-201 you can buy in Kharkiv in the online store of chemicals Novohim.

The liquid for formwork Defender is produced on the basis of highly refined oil and high quality European additives.

Defender Oil-201 formulation agent differs from formwork products Separen , first of all, by its unique properties. Firstly, lubricating and secondly anti-corrosive properties. The product fully ensures easy and fast stripping. In addition, it increases the service life of the molds.

Advantages of Lubricant for formwork Defender Oil-201:

1. Economical consumption
2. No additional preparation before use
3. Works effectively during the cold season
4. Reduces breakout force of the reinforced concrete parts when stripping
5. No need for mechanical cleaning of formwork surface and molds after application
6. Can be applied to vertical and horizontal surfaces
7. No pores, grease stains or other defects on the concreted surface
8. Reliable protection against corrosion
9. longer service life of formwork and moulds
10. Environmentally safe for people and the environment

IMPORTANT!!! It has a particularly beneficial effect on plywood and wooden moulds. Prevents their deformation and increases their service life.

In building production

This release agent is recommended for processing formwork made of wood, plastic and metal. Defender Oil-201 formwork agent, developed by Himprom Ltd. provides easy formwork removal and does not leave any stains, pores and traces of dried concrete on the product.

Follow this link and see all products from the category Construction Chemicals

You can buy Defender Oil-201 lubricant for mouids and formwork from the warehouse of Novohim Company in Kharkiv or with delivery in Kyiv, Dnipro, Poltava, Sumy, Zaporizhzhia, Kherson and all over Ukraine.

The Formwork lubricant Defender OIL-201 / Shuttering oil message appeared first on Novohim.

Cutting fluid for stone Defender Stone you can buy in Ukraine in the online store of chemicals Novohim. For processing and cutting all kinds of stone, including superhard rocks.

First of all it is applicable to work on usual machines. Secondly, it is recommended for CNC machines, automatic and semi-automatic machines. And thirdly, the coolant for stone to buy is designed to work on both low-speed and high-speed machines.

It is noteworthy that Defender “Stone” concentrate is diluted with regular tap water.

The synthetic water-mixable coolant for marble and granite Defender Stone works as a 5% working solution. It is easy to prepare the working solution. Method of mixing concentrate of coolant for stone with water in the ratio of 0.5 litres of concentrate per 9.5 litres of water and then mix thoroughly.

Depending on the hardness of the stone you can increase the concentration of coolant in the solution up to 10%.

Advantages of DEFENDER “Stone” lubricant and coolant

1. Fast and easy preparation of the working solution (dilution) in common water not requiring special preparation
2. Possesses unique lubricating properties which allow you to significantly increase the wear resistance of your cutting tools.
3. Does not change the properties of stone and its color
4. Low foaming
5. Recommended for hard stone applications
6. Long working life of working solution in machines, which does not require the introduction of additional additives and bactericides
7. Long shelf life of the concentrate
8. Environmentally friendly with no sulphur- and chlorine-containing additives, nitrites and phenols.

Such cutting fluid can be purchased for machining:

• Marble and granite
• Other hard stone species
• Ceramics
• Glass
• Examples of applications for glass and stone coolants:
• Hard stone detailing company.

Initial situation: 
The company had problems with quality processing and cutting stone. Also the consumption of cutting tools exceeded all possible limits. A request was made to buy Defender Stone cutting fluid for stone and test it within a month.  As a result, the goal of the test was to find a coolant that would provide high quality machining as well as cutting tool safety.

The solution:
The working solution of the coolant was prepared in 5% concentration in a special tank for the preparation of the working solution. Then, from this tank, the working solution of coolant was poured into the machines where the parts made of hard stone (marble and granite) were machined.  It should be noted that water for preparation of working solution was tap water. A 3% solution of Defender “Stone” cutting fluid was prepared for refilling the machines. It was also ensured that the concentration of coolant was checked with a refractometer.

Result:
To summarize, the Defender “Stone” cutting fluid showed excellent quality of machining hard stone parts as well as high lubricating properties. In addition, the customer reported that the Defender “Stone” coolant had improved tool integrity by more than 60%.

As the above example shows, the price of the stone cutting fluid justifies its use at the company.

All cooling lubricants can be viewed here

Cutting fluid Defender “Stone” you can buy in the warehouse in Kharkiv and with delivery in Kyiv, Poltava, Zaporizhzhia, Dnipro, Sumy, Kherson, Vinnytsia and all over Ukraine.

The Cutting fluid Defender Stone / Lubricant-cooling fluid Defender Stone message appeared first on Novohim.

In metal working

Buy Biol Eco-GREAM in Kharkiv at the Internet-shop of chemical agents Novohim.

This cutting fluid as well as Coolant Biol-ECO, is designed for use in machining of metal. To clarify, the concentrate of this coolant is used for winter works down to -20 ºC.

Undoubtedly, one of the best developments for work at low temperatures is coolant “BIOL-ECO-ZIMA”. Firstly, it has excellent lubricating, the highest anticorrosive and antibacterial properties. Secondly, it does not contain sodium nitrite, chlorine and other harmful substances. Thirdly, it is suitable for works in unheated rooms down to -20 °C.

To obtain 5% of working solution of coolant:

1. For works up to -5 ºC mix with water in the ratio of 1:4 (1 part of concentrate and 4 parts of water)
2. For works down to -10 ºC mix with water in the ratio of 1:2.5 (1 part of concentrate and 2.5 parts of water)
3. At temperature down to -20 ºC mixed with water in ratio 1:1,3 (1 part of concentrate and 1,3 parts of water)

Lubricant-coolant Biol-ECO-Winter buy in Kharkiv from Novohim Company warehouse and with delivery in Kyiv, Sumy, Zaporizhzhia, Poltava, Dnipro, Vinnytsia and all over Ukraine.

The Lubricant-coolant fluid BIOL-ECO-ZIMA message appeared first on Novohim.