Industrial oil I-40 application

In mechanical engineering and metalworking

Industrial oil I-40 to buy in Kharkiv you can buy in the online shop of chemicals Novohim.

Mineral oil I-40 is one of the most popular lubricants used for hydraulic systems of industrial equipment, including automatic lines, machine parks, presses, road machines, etc. Industrial oil I-40 can be purchased for use on any industrial equipment that does not have special requirements for lubricants.

The most important condition in an industrial plant is undoubtedly special attention to the quality lubrication of loaded and rubbing parts of the equipment. When such mechanisms work “on dry” it is possible to get quick wear and tear or complete failure of expensive machines as a result. When using industrial oils I-40 and I-20 as a working fluid, the wear of equipment is reduced by more than 80%.

I-40 oil is recommended for light- and medium-loaded equipment.

Click on the link and see all products from the Lubricants and Coolants catalogue

Advantages of industrial oil I-40:

1. No mechanical impurities in the composition
2. Suitable for use in vehicles and stationary machinery
3. Serves as a hydraulic and lubricating fluid
4. Can be used in mechanisms of different load types and travel speeds
5. Ideal working temperature range -5°C – +75°C

Click on the link and see all products from the Industrial Chemicals catalogue

Industrial oil I-40 can be bought from the warehouse of Novohim Company in Kharkiv or with delivery in Kyiv, Dnipro, Odesa. Kherson, Zaporizhzhia, Lviv, Ternopil and all over Ukraine.

The Industrial oil I-40 message appeared first on Novohim.

Industrial oil I-20 application

In mechanical engineering and metalworking

Industrial oil I-20 to buy in Kharkiv you can buy in the online shop of chemicals Novohim

Industrial oil is the most universal of the whole range of industrial oils. It has an average kinematic viscosity at 40°C of 29-35 mm2/s according to GOST and is suitable for machines and mechanisms of different types of load and running speed.

In addition, it is used on industrial equipment that does not have high technological requirements for oil composition (lubricating or hydraulic fluid). For example, it can be mechanisms or machines for construction or road works, industrial presses, machine tools, sliding guides, etc.

As for the use of industrial oil on machine tools, it is also necessary to take into account that due to the absence of appropriate additives in its composition, the requirements for heat dissipation, anti-corrosion, anti-foaming, anti-oxidation protection of such machines should also be absent. This information is obligatory specified in the equipment documentation

If the requirements are high, e.g. for CNC machines, automatic and semi-automatic machines, then in this case high-tech coolants with all the above listed additives are used as a lubricating fluid. These can be synthetic, semi-synthetic fluids or emulsols with increased oil content.

Click on the link and see all products from the Lubricants and Coolants catalogue

Advantages of industrial oil I-20:

1. No mechanical impurities in the composition
2. Suitable for use in vehicles and stationary machinery
3. Serves as a hydraulic and lubricating fluid
4. Can be used in mechanisms of different load types and travel speeds
5. Ideal working temperature range -5°C – +75°C

Click on the link and see all products from the Industrial Chemicals catalogue

Industrial oil I-20 can be bought from the warehouse of Novohim Company in Kharkiv or with delivery in Kyiv, Dnipro, Odesa. Kherson, Zaporizhzhia, Lviv, Ternopil and all over Ukraine.

The Industrial oil I-20 A message appeared first on Novohim.