Defender Oil Strong application

Universal mineral cutting fluid Defender Oil Strong with a high oil content buy in the online store of chemicals Novohim.

Defender Oil Strong, a high oil content water-miscible oil coolant, was developed as a universal emulsion for all types of steel, including heat-resistant steels, cast iron, aluminium and non-ferrous metals.

The Defender OIl Strong metalworking cutting fluid has a package of professional additives of European quality that allows for efficient and safe processing of ferrous and non-ferrous metals. In addition, the cutting fluid is enhanced with bactericidal properties and is highly resistant to bacterial damage, even during prolonged equipment downtime. At the same time, Defender Oil Strong oil-based metalworking cutting fluid has excellent lubricating and anti-corrosion properties.

The advantages of Defender Oil Strong cutting fluid:

1. The cutting fluid composition is reinforced with special European additives.
2. It enables efficient and safe processing of ferrous and non-ferrous metals.
3. The lubricating properties of the coolant have been increased by 3 times.
4. Enhanced resistance to corrosion and fungal attack.
5. Compatible with all types of metalworking equipment.
6. It works on water of any hardness.
7. Easy to mix.

Breeding recommendations:

Before dilution, the coolant concentrate must be thoroughly stirred. Defender Oil Strong Concentrate 0.5 litres (depending on the type of treatment) is poured into 9,5 litres of hot water and mixed thoroughly using a mixer. Specifically, it works at a 5% concentration of the working solution.

Also note that all oil-based emulsions are highly sensitive to water quality. We therefore recommend that, if the water used to prepare the working solution is hard, you soften it using soda ash. Afterwards, stir thoroughly until the soda ash has dissolved completely.

IMPORTANT! To prepare the DEFENDER STRONG working solution correctly, you must strictly follow the manufacturer’s recommendations.

IMPORTANT! Pouring water into concentrate is FORBIDDEN!

Regularly adjust the working solution in the machines using a refractometer. Observe the concentration in accordance with the supplier’s recommendations.

Refill the machines only with coolant solution, not water!

Store the cutting fluid at a temperature of +5°C and above.

Please note: The price of the working solution is 20 times cheaper than the price of the coolant concentrate (calculated for a concentration of 5%).

Types of treatment and recommended concentration of the working solution:

• Grinding-3%
• Turning-5%
• Drilling-5%
• Deep drilling-5%.
• Milling-5
• Boring-5%.
• Honing-5%

Follow the link to see all products in this category

You can buy Defender Oil Strong oil-based water-miscible coolant in Kharkiv from Novohim warehouse or with delivery in Kyiv, Poltava, Sumy, Zaporizhzhia, Dnipro, Vinnytsia and throughout Ukraine.

The Defender Oil Strong oil-based water-miscible cutting fluid message appeared first on Novohim.

Glue BF-4 to buy in Kharkiv for industrial production, mechanical engineering and automotive industry can be in the online shop of chemicals Novohim.

In industry

BF-4 glue effectively glues metal and stainless steel products.

In addition, formaldehyde glue BF-4 reliably connects metal parts of products with non-metallic ones. This is its distinctive advantage.

Moreover, the adhesive is designed for joining parts subjected to significant vibration and thermal loads.

Properties of BF-4 glue

1. Another advantage of this adhesive is that it retains its adhesive properties perfectly in alkaline environments
2. Moreover, it provides elastic joints
3. Characterised by resistance against decay and corrosion
4. Has a high bonding speed
5. Economical

Industrial glue BF is suitable for joining copper, steel, alloys, wood, leather, plexiglass, ceramics.

Buy glue BF-4 will be equally effective in the temperature range from -60 ° C to + 60 ° C.

Click on the link and see all products from the Industrial Chemicals catalogue

Glue BF-4 can be bought from the warehouse of Novohim Company in Kharkiv or with delivery in Kyiv, Dnipro, Zaporizhzhia, Sumy, Poltava, Cherkassy, Romny, Lviv, Kherson and all over Ukraine.

The Glue BF-4 message appeared first on Novohim.

In electroplating

Aqueous ammonia you can buy in Ukraine in the online store chemicals Novohim – ammonia water 25% can be used as a component compositions in the galvanic processes.

Ammonia water solution for metal treatment

When applied to metal surfaces provides protective qualities for metal against corrosion formation .

Ammonia aqueous technical in agriculture

This is one of the main applications of ammonia water. It is a source of easily digestible nitrogen. The maximum fertilizer efficiency can be achieved when it is applied in the pre-sowing spring and autumn. Provides nitrogen saturation during the whole vegetation period. Stimulates active growth and development of crops.

You can buy technical aqueous ammonia for use on any soil. Shows excellent results when combined with organic bait.

It is also possible to buy ammonia aqueous in bulk and as a feed additive in animal husbandry. Allows saturating animal feed with ammonium.

More fertilizers for agriculture can be found here

In the chemical industry

Another industry where the use of aqueous ammonia is the greatest. After all, it is used:

1. For the production of nitric acid
2. Nitrogen-containing mineral fertilizers
3. Chemical dyes
4. Plastics
5. Alloys of iron with other elements
6. Jewelry industry

Ammonia 25% is used to clean, brighten and aesthetize precious metal products.

Additional Information:

You can buy ammonia water at a fairly low price, but it may vary depending on the degree of purification of the substance.

You can buy ammonia aqueous technical in the warehouse of Novohim online store and in Kyiv, Poltava, Sumy, Zaporizhzhia, Dnipro, Kherson, Vinnytsia, Odesa and all over Ukraine by self-delivery from Kharkiv.

The Ammonia aqueous technical message appeared first on Novohim.

For jewelry making

Ammonia aqueous pure in Kharkiv you can buy in the online store of chemicals Novohim.

Ammonia water 25% pure is an excellent tool for cleaning glass surfaces, jewelry and jewelry. It is also a highly effective component of cleaning compositions. Adds shine and aesthetic appearance to precious metal items.

Click here for more products in this category

Ammonia pure water for medicine and pharmaceutical industry

Pure ammonia water can be bought as the well-known ammonia alcohol or ammonia. Helps to bring a person out of a fainting state.

It is also used for external use to treat neuralgias and bites of insects and snakes.

In animal husbandry and veterinary medicine.

Ammonia aqueous 25% pure to buy for the production of feeds is a component, a food additive for saturating them with ammonium.

Used in veterinary medicine as a therapeutic agent for external and internal use.

Ammonia aqueous 25% for construction

Ammonia aqueous pure buy in bulk as an antifreeze additive for concrete:

1. Does not cause corrosion of rebar
2. Improves the weather resistance of concrete
3. Does not leave efflorescence and stains on concrete and reinforced concrete products.

Click here to see all products in this category

At home

Quite often, ammonia aqueous pure 25% is used for bleaching laundry and is also added to solutions for washing glass and windows.

Additional Information

The price of pure ammonia water 25% may vary depending on the amount of impurities and packaging of the product.

You can buy ammonia aqueous pure water in Kharkiv from Novohim Company warehouse and in Kyiv, Poltava, Sumy, Dnipro, Zaporizhzhia, Lviv, Odesa, Kherson, Mykolaiv and all over Ukraine by self-delivery from Kharkiv.

The Ammonia aqueous pure message appeared first on Novohim.

Organosilicon Vaseline in metallurgy and mechanical engineering

Organosilicon Vaseline can be bought in Kharkiv in the online shop of chemicals Novohim.

It is used for surface treatment of metal units, mechanisms, engines, parts as anticorrosive lubricant during inter-operational storage. You can also buy KV-3/10E organosilicon petroleum jelly for use as a separating lubricant and dielectric. Perfectly provides protection in a wide temperature range from -60 to +200 C . In addition, it works well in conditions of high humidity and mechanical contamination.

In the electrical engineering industry

Vaseline KV is used in the production of semiconductor devices and as a filler for enclosures and their protection. In addition, it serves as an auxiliary electrical insulating material for insulators of high-voltage networks.

Organosilicon petroleum jelly is suitable as a means of preventing vibrations (damping) that may occur in electrical devices, systems, mechanisms during their operation. Moreover, buy organosilicon petroleum jelly can be used in electronics and radio engineering. This highly viscous material gives strong dielectric characteristics to the surfaces of these products, including printed circuit boards.

Vaseline KV-3/10E in glass industry

Provides reliable protection of the surface of nanositals (glass-crystalline material) and reduction of their wettability.

Click on the link and see all products from the Industrial Chemicals catalogue

Organosilicon Vaseline can be bought from the warehouse of Novohim Company in Kharkiv or with delivery in Kyiv, Dnipro, Lviv, Sumy, Poltava, Cherkassy, Zaporizhzhia and all over Ukraine.

The Organosilicone Vaseline KV-3/10E message appeared first on Novohim.

In construction

You can buy Separen in Kharkiv in our online store of chemicals Novohim.

Advantages of using Separen:

1. Applicable for the lubrication of all types of formwork in the production of products from concrete, plaster and other construction mixtures
2. SEPAREN is environmentally friendly, does not change the color of concrete and is approved for use with white concrete.
3. It is economical, for one application of a thin layer of SEPAREN it is allowed up to 3 exposures.

IMPORTANT!!! It is recommended to use working solutions of Separen with water as in too viscous state means loses its effective pouring properties, worsens concrete surface and form cleanness.

Dilute by experience until a layer of desired density is obtained.

Add concrete to the mold only after the applied layer has dried and a film of Separene has formed.

Instructions for use of Separen.

Separen can be applied with a roller, brush or spray gun. Concrete should be added to the mould only after the applied layer has dried and a film of Separen has formed.

The release agent can be used as a concentrate or aqueous solution. Depending on the type of moulds and working conditions, it can be diluted with water in the ratio of 1:1 or up to 1:3, as decided by the technologist. After adding water, the solution should be thoroughly mixed.

IMPORTANT:
The amount of water is selected experimentally, taking into account temperature, humidity and peculiarities of the formwork material.

Application:

1. Apply to a clean, dry formwork surface in a thin, even layer using a brush, roller or sprayer.
2. Allow to stand for 30-60 seconds until wet sheen disappears.
3. Be sure to: wipe the surface with a damp sponge or soft cloth. This removes excess and polishes the thin layer of wax phase.
4. Concrete can be laid immediately after drying.

Result:
After drying, a thin, glossy, water-repellent film is formed which:
– will not be washed off by rain,
– does not give white stains on the concrete,
– does not affect the surface quality of the product.

Follow this link and see all products from the category Construction Chemicals

You can buy Separen from the warehouse of Novohim Company in Kharkiv or with delivery in Kyiv, Dnipro, Zaporizhzhia, Poltava, Sumy, Zhytomyr, Vinnytsia and all over Ukraine.

The Separen message appeared first on Novohim.

In the chemical industry

Oleic acid technical you can buy in Kharkiv in the online store chemicals Novohim.

Oleic technical acid is used as a hydrophobic additive in the production of high quality asphalt.

In metal processing

Oleic acid is an effective cutting fluid (coolant) for machine tools engaged in the machining of metal parts made of hard alloys, high-alloy steels, including stainless. Elainic acid’s lubricating properties facilitate bimetallic core drilling operations, hard alloy turning operations, drilling and threading.

But if we compare oleic acid and professional cutting fluid, then of course, modern coolant will perform much better in work. Because professional semi-synthetic coolants, such as Defender Pro or Defender Standard, contain only high-quality lubricants and additives that make these fluids as efficient as possible, preserving the quality of the tool and with an extended service life. They have no unpleasant odour, are safe and environmentally friendly, and do not cause skin irritation to personnel.

It is also part of mixtures for finishing cutting parts of work tools and forming precise sealing surfaces.

Oleic acid in the chemical industry

Elic acid is a component of a large number of detergents

In the paint industry

Technical oleic acid is a popular medium for the production of varnishes, olive oils and emulsifiers

In the cellulose and paper industry

It also serves as an effective plasticizer for cellulose in the cardboard and paper industry.

Follow this link and see all products from this category

You can buy oleic acid from the warehouse of Novohim Company in Kharkiv or with delivery in Kyiv, Dnipro, Sumy, Zaporizhzhia, Poltava, Kherson, Odesa, Vinnytsia and all over Ukraine.

The Oleic acid technical message appeared first on Novohim.

Metal processing

Oleic acid pure you can buy in Kharkiv in the online store of chemicals Novohim.

Irreplaceable in the processing of hard highly alloyed alloys, including stainless steels. Lubricating properties of purified oleic acid facilitate bimetallic core drilling operations, turning operations with hard alloys, drilling and threading.

Oleic acid pure is part of special mixtures used for surface finishing where the thickness of the stripped layer is up to 22 microns, for tool finishing and for shaping precise sealing surfaces.

Oleic acid pure remains the most effective coolant for machine tools that perform machining operations on metal carbide products.

In the chemical industry

Pure oleic acid is a component of many modern detergents

Oleic acid in coatings industry.

It is also used in the production of varnishes, lacquers and emulsifiers

In the paper industry

Purified oleic acid also acts as a cellulose plasticizer

Food industry

Pure, odorless oleic acid is used in the production of flavorings

Follow this link and see all the products in the Industrial Chemicals catalog

You can buy pure oleic acid from the warehouse of Novohim Company in Kharkiv or with delivery in Kyiv, Dnipro, Sumy, Zaporizhzhia, Vinnytsia, Krivoy Rog, Poltava, Lviv and all over Ukraine.

The Oleic acid pure (odorless) message appeared first on Novohim.

Ethylacetate solvent at enterprises

Ethylacetate to buy in Kharkiv – a popular solvent for industrial and household needs can be in the online shop of chemicals Novohim.

Ethyl ether of acetic acid has low toxicity, has a fairly neutral odour and, in addition, is inexpensive.
It is necessary to buy ethylacetate solvent as a solvent:

• acetylcellulose
• fats
• nitrates
• waxes
• cellulose.

Follow the link to see more items from this category

Ethylacetate ester in the chemical industry

If alcohol is mixed with the substance ethyl acetate, such a mixture can be used in the production of artificial leather as a solvent.
Also this preparation is very popular among poisons, in entomology, in stains for killing insects.
In addition, the solvent ethyl acetate gost is used in the production of acetoacetic ether.

In the food industry

Moreover, ethyl acetate can also be used in the food industry. Namely, as an additive E1504 (composition of fruit essences).

Physicochemical properties of ethyl acetate

The Ethylacetate message appeared first on Novohim.

In electrotechnical production

Paste KPD to buy in Kharkiv you can buy in the online shop of chemicals Novohim.

Dielectric paste is used as a hydrophobic and heat-resistant dielectric in electrical equipment and apparatus.

In addition, this paste is used for sealing p-n junctions.

KPD paste in power supply

Dielectric paste is a reliable and effective auxiliary insulating material for insulators of high-voltage lines and contact networks.

Importantly, it is able to maintain its performance in the temperature range from -60°C to +200°C.

Moreover, dielectric KPD paste protects insulators from moisture, dirt and other unfavourable environmental factors and various external influences.

KPD paste is suitable for application on ceramic, glass and composite materials.

Click on the link and see all products from the Industrial Chemicals category

KPD paste can be bought from the warehouse of Novohim Company in Kharkiv and with delivery in Kyiv, Dnipro, Sumy, Poltava, Kherson, Lviv, Zaporizhzhia, Ternopil, Vinnytsia, Melitopol and all over Ukraine.

The Dielectric paste KPD message appeared first on Novohim.