Charcoal dust is a powdery brand of charcoal, formed in the process of spraying or mechanical processing of BAU coal grade A. Obtained from environmentally friendly birch charcoal, charcoal dust can be used in various spheres of economy and industry.

This makes it ideal for cleaning liquids,  as well as in industry.

Charcoal dust application

In the production of charcoal briquettes

Wood charcoal dust is characterised by a long working life. Because it is a derivative of BAU-A grade A coal, which complies with the normative indicators of DSTU.

Coal dust for the production of coal briquettes is an excellent binder due to its availability, ease of use and useful properties.

Charcoal dust in water treatment

Wood charcoal dust is used in filtration units at processing plants for the treatment of water used in the production .

In addition, charcoal dust for filters can also be purchased for use in small-sized filters for additional treatment of  water. Here it is also a necessary element of the purification system.

In the metallurgical industry

In this industry, charcoal wood dust is a unique reducing agent. This is due to the fact that it contains no sulphur or phosphorus. It is used in casting applications.

It is also used as a covering flux in the production of nickel-based alloys, brass and other non-ferrous metals.

It can also serve as a carburiser for cast iron, steel and iron. Carburiser or graphite can also be purchased as a carburiser, depending on the production task.

Charcoal dust can be bought in Kharkiv from the warehouse of Novohim Company or with delivery in Kyiv, Poltava, Sumy, Kherson, Vinnytsia, Zaporizhzhia, Dnipro and all over Ukraine.

The Charcoal dust message appeared first on Novohim.

Iron oxide yellow pigment U-710 is produced at the Czech factory “Precheza”. Due to the excellent factory quality, the pigment for concrete has:

• high colouring power
• provides a uniform, durable colouring of concrete or cement mixes
• has increased chemical, mechanical and weather resistance
• resistance to aggressive environments
• high temperature resistance

These properties are confirmed by the presence of appropriate quality certificates of the European Union. Thermal stability of dry pigment yellow U-710 allows to use it for colouring of products subjected to subsequent heat treatment. It should be noted that the brightness and saturation of tint remain unchanged.

Resistance to aggressive media makes it possible to use the dry colouring agent for ceramic tiles and other ceramic and ceramic-plastic products.

Immunity to ultraviolet rays guarantees long-lasting colour retention for tiles and other roofing materials. Including mosaic and “lock” paving tiles.

No less demanded iron oxide yellow pigment U-710 to buy and for colouring dry construction mixtures. For example:

1. Cement-sand
2. Gypsum mixtures
3. Grouts
4. Plasters
5. Facing tiles
6. Decorative stone for exterior and interior
7. Creation of coloured architectural forms and design structures
8. Production of high quality paints and enamels.

The dosage of Czech yellow pigment is 4-6% by weight of dry cement.

Click on the link to view all items in this category

You can buy yellow Czech pigment from the warehouse of Novohim Company in Kharkiv or with delivery in Kyiv, Dnipro, Sumy, Poltava, Zaporizhzhia and all over Ukraine.

The Pigment yellow Y-710 Czech Republic message appeared first on Novohim.

In metal working

Charcoal carburizer buy in Kharkiv in the online store of chemicals Novohim for carbon enrichment of iron and steel products.

Charcoal Carburiser is used in metalworking for carbon saturation of cast iron and steel products. It is a proven and reliable method of hardening metals and provides effective surface strengthening by carburising. During heating, carbon is transferred from charcoal pellets coated with a film of barium carbonate to the metal parts. This ensures uniform carbon saturation. The duration of the carburising process depends on the quality of the carburiser and can take up to 12 hours to form a 1 mm thick layer.

Advantages of carburizer from Novohim:

1. High quality raw materials:
   Produced from grade A charcoal (GOST 7657-84) containing at least 90% non-volatile carbon.
2. Barium carbon dioxide content:
   Not less than 22%, which ensures high grouting efficiency.
3. Long life:
   Suitable for reuse up to three cycles.
4. Optimum granulometry:
   Promotes better gas circulation during the thermal hardening process.

At the bottom of a special container is placed carburizer – fine charcoal, granules of which are covered with a composition of barium carbonate. Products are placed on top of the pellets, which are then completely covered with carburizer. The container is then sent to a high-temperature furnace for thermal hardening. The quenching process to 1mm thickness can take up to 12 hours. Because basically the duration of the hardening process depends directly on the quality of the carburizer.

Result: the products acquire high strength and wear resistance due to carbon saturation of the surface.

For the production of quality carburettor is used charcoal only according to GOST 7657-84 and only grade A. After all, only in such a coal mass fraction of non-volatile carbon will not be less than 90%.

In this regard, we do not recommend you to buy the cheapest product on the market, as it, with a probability of 1000%, will be produced from coal dust, its waste. Accordingly, its carbon content will be extremely low. And such a ‘carburettor’ is money thrown away. Coating with such a carburettor will be a short-term frank defect and will cost wasted energy resources and financial costs.

How to choose a quality carburizer see here

The price at which you can buy carburiser for cementation in our company is a little more expensive than some copies presented on the market of Ukraine. However, you get a guarantee of quality from the manufacturer, economic benefit due to the repeated possibility of using the product without replacement, unlike cheap counterfeit. The cheapest versions of carburettors on the market are often made of coal waste with low carbon content. The use of such a product leads to rejects, additional energy and material costs.

Why buy carburettoriser from Novochim:

1. Quality Guarantee:
   The product fully complies with GOST 2407-83 standards and provides stable results.
2. Economic benefit:
   The ability to reuse the product allows you to reduce costs.
3. Increased efficiency:
   Reduction of grouting duration up to 10 hours without loss of quality characteristics.
4. Energy saving:
   Rational utilisation of resources during heat treatment.

Besides, to buy a carburizer in Kharkiv developed by Novohim means to get a quality product, which retains its carburizing properties during a large number of hardening cycles. Provide products with a high degree of carbon saturation and allow significant savings on the purchase of new consumables.

Additional features:

Follow this link to see more products from this category

You can buy the carburizer in Ukraine from the warehouse of Novohim Company in Kharkiv and with delivery in Kyiv, Sumy, Poltava, Zaporizhzhia, Dnipro, Vinnytsia, Kherson and other cities.

The Charcoal Carburizer message appeared first on Novohim.