Mineral fertilizer

You can buy Bishofite in Kharkiv in the online store of chemicals Novohim.

Note that bischofite or magnesium chloride – a natural mineral, an excellent fertilizer for foliar feeding plants.

In addition, magnesium chloride is a preventive agent against the defeat of plants by bacteria and other harmful microorganisms.

It is an effective means to combat wind erosion of topsoil, acting as a soil stabilizer.

Bischofite in agriculture

The mineral bischofite is successfully used in animal husbandry and poultry farming. Namely, as a natural food additive, a source of magnesium and its compounds in the feed.

In construction

Magnesium chloride is a raw material for the production of construction cement.

In the municipal sector

Bischofite can be bought in Ukraine as an effective de-icing agent. Experimentally verified its safety and mild effect on asphalt pavement and rubber. Therefore choosing between calcium chloride and bischofit, many choose bischofit.

Magnesium chloride is also used in fire suppression formulations.

It is noteworthy that Bischofite is also used in water treatment systems.

Instructions for use of bischofite

Clear the surface of loose snow to reduce surface moisture before applying bischofite. Sprinkle the reagent before the hours of maximum community activity. Wait until a mushy mass appears, clean the road surfaces.

Consumption rates for snow removal (per 1 mm of precipitation) depend on the air temperature from 15 g/m2 at -4°C to 80 g at -30°C.

Consumption rates for ice removal with a thickness of 1-2 mm depend on the temperature from 10g/m2 at -2°C to 80g at -30°C.

The information is general, consumption rates should be set individually depending on the environmental conditions.

Follow this link and see all products from the category Construction Chemicals

Bischofite you can buy from the warehouse of Novohim Company in Kharkiv or with delivery in Kyiv, Dnipro, Sumy, Zaporizhzhia, Kherson, Vinnytsia and all over Ukraine.

The Magnesium chloride / Bischofite message appeared first on Novohim.

It belongs to the number of non-ionogenic surfactants, emulsifiers, which determines its use.

Sulfanol application

In the chemical industry

Sulfanol is included in most household detergents, hand washing powders, as an effective agent for removing dirt.

Sodium alkylbenzenesulfonate concentrate is added as a foaming agent:

1. Dishwashing detergents
2. Grease removers
3. In automotive cosmetics
4. Disinfectants
5. Sulfanol is included in latexes

In the paint and varnish industry

Sulfanol dry buy possible as an emulsifier and wetting agent is included in the composition of paints and varnishes.

Sulfanol in construction

This surfactant is used in the production of practical and economical building material – foam concrete.

In textile production

Sulfanol surfactant is used in the processes of processing and preparation of fibres, in textile dyeing.

In metallurgy

Sulfanol acts as a binder and as an anti-corrosion additive in foundries.

Sulfanol in oil and gas production

It is one of the components of a composition that regulates the viscosity of drilling fluids.

Click on the link and see all products from the surfactants category

Sulfanol concentrate dry can be bought from the warehouse of Novohim Company in Kharkiv or with delivery in Kyiv, Poltava, Sumy, Dnipro, Zaporizhzhia, Kherson, Vinnytsia and all over Ukraine.

The Sulfanol message appeared first on Novohim.

Aspartame E951 to buy in Kharkiv in the online shop of chemicals Novohim.

Aspartame in medicine

Sugar substitute aspartame is widely used as a sugar substitute for people with diabetes. In addition, sugar substitute E951 is present in tablet casings and vitamins. It is used in dietetics for therapeutic nutrition.

Food industry

Aspartame is registered as food additive E951 and is used in the manufacture of:

• chocolate
• jams
• ice-cream
• dairy products
• tinned fruit and jelly
• confectionery
• n the manufacture of soft drinks
• chewing gum, etc. as a sweetener.

An important feature of aspartame is that it is unstable on heating and consumes most of its properties. Therefore, it should not be used in heat treatment processes.

Aspartame for cosmetic production.

It is used as an ingredient in toothpastes, rinses and other oral care products.

Physico-chemical parameters of aspartame:

Click on the link and see all products from the Industrial Chemicals catalogue 

Aspartame can be bought from the warehouse of Novohim Company in Kharkiv and with delivery in Kyiv, Dnipro, Sumy, Poltava, Kherson, Lviv, Ternopil, Vinnytsia, Zaporizhzhia, Kherson and all over Ukraine.

The Aspartame / Food additive E951 message appeared first on Novohim.

In food production

Sodium lactate food additive E325 to buy in Kharkiv you can buy in the online shop of chemicals Novohim.

Sodium lactate is used for:

1. Sodium lactic acid is registered as food additive E325 – preservative
2. Sodium lactate acts as a moisture retaining agent, increases shelf life of products
3. Food additive E325 serves as an acidity regulator and emulsifier of compositions
4. Sodium lactate enhances the effect of antioxidants
5. Used as a thickener and filler.
6. Improves the flavour of products

Lactic acid sodium in the food industry is used in the production of beverages, semi-finished products, bakery and confectionery products, meat and seafood, sauces and dressings, etc.

In the manufacture of household chemicals and cosmetic products

Lactate is a component of a number of household and cosmetic products. Due to its quality of preservative and anti-bacterial properties, sodium lactate is widely used in the production of shampoos, bath foams, soaps, creams, lotions, etc. In addition, sodium lactate effectively maintains the required moisture level (moisturises) and stabilises the pH values of preparations.

Physico-chemical parameters:

Click on the link and see all products from the Industrial Chemicals catalogue

Sodium lactate can be bought from the warehouse of Novohim Company in Kharkiv and with delivery in Kyiv, Dnipro, Zaporizhzhia, Sumy, Poltava, Kherson and all over Ukraine.

The Sodium lactate / Sodium lactic acid E325 message appeared first on Novohim.

In food production

Sodium alginate food additive E401 to buy in Kharkiv can be in the online shop of chemicals Novohim.

Sodium alginate is used for:

1. Food alginate is registered as food additive E401
2. Sodium alginate acts as a thickener and gelling agent
3. Food additive E401 serves as a stabiliser-emulsifier in final product formulations
4. Sodium alginate is added to marmalades, jellies, candies, ice cream
5. Sodium alginate is used in the production of juices.

In the manufacture of household chemicals and cosmetic products

Alginate is a component of a number of gel-like detergents, preparations. In cosmetology, these are very popular alginate face masks with the addition of nourishing components (vitamin C, algae, vitamin A, etc.).

Sodium alginate in pharmaceutical production

It is used in the formulation of antacids. In addition, sodium alginate is part of the therapeutic diet for long-term radioactive exposure.

Physico-chemical parameters:

Click on the link and see all products from the Industrial Chemicals catalogue

Sodium alginate can be bought from Novohim Company warehouse in Kharkiv and with delivery in Kyiv, Dnipro, Zaporizhzhia, Sumy, Poltava, Kherson and all over Ukraine

The Sodium alginate / Food additive E401 message appeared first on Novohim.

In agriculture

Zinc chelate EDTA 15% buy in Kharkiv you can buy in the online shop of chemicals Novohim for agriculture.

In agriculture, zinc chelate is one of the most important trace elements, taking part in metabolism, synthesis of hormones and presence of necessary enzymes in plants.

Zinc (Zn) contained in the chelate is an indispensable micronutrient required throughout the life of the plant. Zinc is involved in the stabilisation of cellular processes and phytosystems. It forms and strengthens plant immunity to viral, bacterial and fungal diseases, affects growth and development, increases yield. Zinc deficiency causes metabolic disorders, possible manifestation of chlorosis, reduction of photosynthesis processes in plants.

Zinc in chelate form is a white coloured dry powder. However, zinc chelate is often added to liquid mineral fertilisers in the form of a concentrated solution. By their nature, chelates are biologically active complexes of substances close to those that exist in the natural environment. They are safe for plants, regardless of the growth phase. According to the experience of our customers, we can safely say that chelates after application are in the active phase (assimilation phase) for a long time and are assimilated by more than 90-95%. In addition, there are many more advantages of iron chelate.

Advantages of zinc in chelate form:

1. Easily digestible and safe
2. Compatible with other fertilisers, micro- and macronutrients, pest control agents
3. Participates in vital cycles of plant development and growth
4. Increases immunity and resistance of plants to diseases
5. Dissolves well in water
6. Has a wide pH range in the working solution
7. Has a high level of absorption and penetration through plant leaves.

Instruction for use of zinc chelate.

Usually zinc in chelate form is used in the form of an aqueous solution. Treatment can be carried out by foliar application as well as drip irrigation. It can also be applied on different types of soils.

Dosage for foliar application is 0.3-1kg/ha;

Dosage for drip irrigation – 0.5-1kg/hectare.

It is important not to exceed the concentration of the preparation.

The price of zinc chelate fully justifies the importance of its use for the full development of plants and increasing yields.

Click on the link to see the full catalogue of Industrial Chemicals

Zinc chelate can be bought from the warehouse of Novohim Company in Kharkiv and with delivery in Kyiv, Zaporizhzhia, Dnipro, Kherson, Sumy, Poltava, Vinnytsia and all over Ukraine.

The Zinc chelate message appeared first on Novohim.

Anhydrous Sodium Acetic Acid can be purchased in Kharkiv from the Novohim online store.

In the production of salt pads

Second-hand sodium acetate is used in everyday life as a component of chemical heating pads or chemical heaters.

In textile production

It is used to neutralise waste sulphuric acid in wastewater and as a photoresist for aniline dyes.

It is also used for tanning with chromium salts (for mordanting)

Anhydrous sodium acetic acid in construction

Sodium acetic acid as an antifreeze additive for heavy, fine-grained and lightweight concrete. It is also used in the construction of monolithic concrete and reinforced concrete structures.
Moreover, sodium acetate is used in the vulcanisation of chloroprene in the production of synthetic rubbers.

Food industry

Anhydrous sodium acetic acid is registered as food additive E262 and is used as a preservative.

As a salt of a weak acid, in a solution of sodium acetate, anhydrous sodium acetic acid can be used as a buffer to maintain a relatively constant pH. This is particularly useful in biochemistry in pH-dependent reactions.

Physical and chemical parameters:

Follow the link and see all the products from the Industrial Chemicals catalogue

Anhydrous acetic acid sodium can be purchased from Novohim’s warehouse in Kharkiv and delivered to Kyiv, Kherson, Zaporizhzhia, Sumy, Lviv, Vinnytsia, Poltava, Odesa and throughout Ukraine.

The Sodium acetic acid anhydrous / sodium acetate anhydrous message appeared first on Novohim.

In electroplating

Copper oxide can be bought in Kharkiv in the online shop of chemicals Novohim.

It is used as a constituent of electrolytes for electroplating baths. Copper oxide is included in baths for:

• copper plating
• phosphating
• oxidising brass products

In addition, copper oxide acts as a catalyst for some chemical processes. Copper oxide is also a powerful oxidising agent and is capable of decomposition only at temperatures of +400°C and above.

Copper oxide for the production of glass

The use of copper oxide in glass production is very popular. Here the pigment properties of this substance are used. Namely, the ability to colour glass products in rich ruby and copper colours. Such products are widely used in decoration and individual interior design.

In the production of animal feed

Copper oxide is added to cattle feed formulations as a trace element.

In the paint and varnish industry

It is worth noting that copper oxide is used in the manufacturing process of various paints, glazes and enamels as a pigment of blue and green colour.

Copper oxide in chemical production

In the production of chemical reagents, copper oxide serves as an indicator for chemical reduction processes. It is often used as a superconductor because it can withstand high temperatures. It is also used in the production of other copper compounds.

Click on the link and see all products from the Industrial Chemicals catalogue

Copper oxide can be bought from Novohim Company warehouse in Kharkiv and with delivery in Kyiv, Zaporizhzhia, Lviv, Sumy, Poltava, Vinnytsia, Ternopoli, Dnipro, Kherson and all over Ukraine.

The Copper oxide message appeared first on Novohim.

In agriculture

You can buy copper chelate in Kharkiv in the online shop of chemicals Novohim for agriculture.

In agriculture, copper chelate is one of the key micronutrients for plant growth and development.

Copper is one of the main micronutrients for the maintenance of plant viability. Cu plays an important role in the process of photosynthesis, in the formation of lignin to provide an upright position to plants. In addition, the micronutrient copper contributes to successful metabolism, seed setting and increases the plant’s resistance to drought, temperature and disease, and strengthens the root system.

Copper deficiency has a negative effect on yield and fruit quality. Therefore, copper should be applied in a timely and regular manner in accordance with soil analysis and application recommendations for the crop.

The trace element copper can be a separate bait or included in complex fertilisers. In our case it is copper in chelated form.

Copper chelate is a concentrated microfertiliser which, thanks to its chelate form, is better absorbed by plants.

Advantages of copper chelate:

1. Safe, toxin free
2. Has good compatibility with other fertilisers and plant protection products
3. Absorbed 30-50% easier and faster than copper sulphate
4. Dissolves well in water
5. Increases yield and fruit quality
6. Increases stress resistance of plants to drought and temperature fluctuations
7. Activates and stabilises metabolic processes
8. Strengthens immunity to diseases and pests.

Instructions for the use of copper in chelate form.

For root application the recommended average dose is 0.5-1kg/ha. For foliar application (irrigation) – 200-400l/ha, and for grapes up to 1000l/ha. Irrigation should be carried out immediately after preparation of the solution, in the morning or evening hours.

In conditions of copper deficiency it is recommended to apply copper chelate 2 times for all crops.

The price of copper chelate fully justifies the importance of its use for the full development of plants and increasing yields.

Click on the link to see the full catalogue of Industrial Chemicals

Copper chelate can be bought from the warehouse of Novohim Company in Kharkiv and with delivery in Kyiv, Zaporizhzhia, Dnipro, Kherson, Sumy, Poltava, Vinnytsia and all over Ukraine.

The Copper chelate message appeared first on Novohim.

In agriculture

You can buy iron chelate in Kharkiv in the online shop of chemicals Novohim for agriculture.

In agriculture, iron chelate is one of the key micronutrients for plant growth and development.

The iron (Fe) contained in the chelate is an essential micronutrient required throughout the life of the plant. Iron is involved in the formation of chlorophyll. Most often in case of iron deficiency in soils (chernozems, grey soils), chlorosis occurs in plants. For example, roses, grapes, ornamental plants are very susceptible to this disease. In order to eliminate and prevent diseases, to stabilise metabolism and correct photosynthesis, it is important that plants receive this trace element in sufficient quantities.

Iron in chelate form is an orange-coloured dry powder. However, iron chelate is often added to liquid mineral fertilisers in the form of a concentrated solution. By their nature, chelates are biologically active complexes of substances close to those existing in the natural environment. They are safe for plants, regardless of the growth phase. In terms of plant assimilation, from the experience of our customers, we can safely say that chelates after application are in the active phase (assimilation phase) for a long time and are assimilated by more than 90-95%. In addition, there are many more advantages of iron chelate.

Advantages of iron in chelate form:

1. Easily digestible and safe
2. Compatible with other fertilisers, micro and macro nutrients, pest control agents
3. Participates in the vital cycles of plant development and growth
4. Increases immunity and resistance of plants to diseases
5. Good solubility in water

Instructions for use of iron in chelate form

Usually iron in chelate form is used in the form of a water solution based on the proportion of 5g of the preparation per 10 litres of water. However, the amount can be increased, depending on the degree of iron trace element deficiency. Treatment can be carried out both root and foliar. It can also be used on different types of soils.

The price of iron chelate fully justifies the importance of its use for the full development of plants and increasing yields.

Click on the link to see the full catalogue of Industrial Chemicals

Iron chelate can be buy from the warehouse of Novohim Company in Kharkiv and with delivery in Kyiv, Zaporizhzhia, Dnipro, Kherson, Sumy, Poltava, Vinnytsia and all over Ukraine.

The Iron chelate message appeared first on Novohim.