Ethylene glycol 40% solution is a ready-to-use ethylene glycol-based heat transfer fluid used in heating, air conditioning, and industrial refrigeration systems. Its optimal concentration ensures reliable freeze protection, stable heat transfer, and long-lasting durability of utility systems.

40% ethylene glycol solution is available for purchase at Novohim’s warehouse in Kharkiv or with delivery throughout Ukraine.

The primary use of 40% ethylene glycol solution is as a heat transfer fluid for heating systems.

What is 40% ethylene glycol solution?

Ethylene glycol 40% is an aqueous ethylene glycol solution with an optimal concentration that requires no additional dilution before use. The product is ready to be added to the system and ensures stable operation at low temperatures.

Main functions:

• Freeze protection
• Heat energy transfer
• Stable water circulation in the system
• Equipment protection from corrosion
• Prevention of deposit formation

40% ethylene glycol solution for heating as a coolant

Its advantages undoubtedly include protection against corrosion and pressure surges in the system. It can be used in closed single-circuit heating systems.

Advantages of 40% ethylene glycol solution

Using 40% ethylene glycol provides significant advantages:

• effective method of protecting the system from freezing
• stable operation at low temperatures
• improved thermal conductivity
• reduced risk of damage to pipes and equipment
• long service life
• ready to use without additional mixing
• saving time and resources

Why use a 40% ethylene glycol solution?

A 40% concentration is optimal for most climatic conditions in Ukraine because:

•  provides effective freeze protection
•  maintains good fluidity
•  maintains stable circulation in the system
•  does not place excessive strain on pumping equipment

The cost of ethylene glycol solution fully justifies its purchase and its properties. It is cheaper than propylene glycol solution, as it has limitations in its use (it is not recommended for use in open heating systems).
It also has an advantage over water. Water only reduces the temperature to 1.1°C, which is ten times less than ethylene glycol.

How to use ethylene glycol solution

1. Check the system for leaks
2. Flush the circuit before filling (if necessary)
3. Fill the system with the prepared solution
4. Bleed air from the system
5. Start the equipment

More information about propylene glycol solution, as well as the relationship between freezing point and density, can be found at the link

More information

You can purchase ethylene glycol concentrate from our warehouse in Kharkiv and with delivery throughout Ukraine.

Our company partners with many transport companies and carriers throughout Ukraine. You receive your order on time, and we guarantee reliability and quality. Call and order from a trusted supplier.

The Ethylene glycol solution 40% message appeared first on Novohim.

Coolant Freezlight Frost -60°C for cooling systems:

Freezlight Frost -60°C potassium formate-based coolant for cooling systems can be purchased in Kharkiv from the Novohim online chemical reagents store.

If you want to ensure stable operation of your cooling system and protect your equipment from temperature fluctuations and corrosion, you should consider using a potassium formate-based coolant. The use of potassium formate in cooling systems is becoming increasingly popular because it is resistant to freezing even at low temperatures. Thanks to these properties, potassium formate for cooling and air conditioning systems is particularly useful for use in various cooling equipment.

Many buyers choose potassium formate-based coolants because of their low viscosity and high efficiency at low temperatures.

This substance has many undeniable advantages in the coolant market:

1. It has high thermal conductivity.
2. It retains its properties at extremely low temperatures and does not lose its effectiveness at high temperatures (max +45C).
3. Low viscosity, which reduces energy consumption for circulation in the system.
4. It has low corrosion effects on metals (steel and copper).
5. In addition, it is not aggressive to rubber hoses and seals in the heating system.
6. The price of the coolant is much cheaper than equipment repairs.
7. It has a long service life. Potassium formate solution in the cooling system retains its properties for several years without the need for frequent replacement.

The main advantage of potassium formate-based coolant in cooling systems is its environmental safety, unlike ethylene glycol, low toxicity and high performance characteristics

Where is the coolant Freezlight Frost -60°C potassium formate-based for cooling systems used?

Potassium formate has become the standard refrigerant for many modern cooling systems.  Only applicable in closed cooling systems without excessive overheating (up to +35, +45°C). Thanks to its safety and reliability, it is used in many industrial cooling systems. It is ideal for use in:

• In refrigeration systems in the food industry
• In pharmaceutical equipment
• Industrial heating and cooling systems
• Other heat exchange equipment

Read about which heat transfer fluid to choose at this link.

Follow the link and select a heat transfer fluid based on:

propylene glycol

glycerine

ethylene glycol

Learn more about replacing the coolant and caring for your heating system at the link.

Follow the link and view all products in this category.

Not only can you buy heat transfer fluids and coolants from us, but you can also get advice on their use and selection. We offer only proven and certified products, which guarantees their high quality and reliability.

The Coolant for cooling systems potassium formate-based Freezlight Frost -60°C message appeared first on Novohim.

In cosmetic production

Propylene glycol food grade buy in Ukraine for cosmetics is significant and important. This is due to the fact that it attracts and retains moisture from the air in the skin cells for a very long time.

Consequently, food grade propylene glycol is primarily used as a moisturiser for the production of cosmetics.

1,2 propanediol is added to shampoos, creams, masks and moisturisers for hair and skin care. In addition, propylene glycol cosmetic buy wholesale can be added to toothpastes, deodorants, wet wipes, lipsticks and other cosmetics. Because, its use helps to add softness, elasticity and healthy appearance to the skin and hair.

Useful properties of food grade propylene glycol:

• has some antiseptic and antifungal action
• acts as a surfactant and emulsifier
• improves the texture of the formulation
• corrects foaming of the final product
• increases the freezing point and lowers the melting point of the finished product.

The price of food grade propylene glycol is slightly higher than the price of technical grade propylene glycol. This is understandable, the less impurities in the substance, the more it is valued.

In the pharmaceutical industry

Food grade propylene glycol is used as a solvent and excipient in many medicines. It is also used as a moisturiser for external medicines, creams, lubricants and massage oils. Moreover, it is a moisture retainer for non-food flavourings.

Propylene glycol in the food industry

You can buy food grade propylene glycol for the production of many food products. Namely, biscuit rolls, biscuits and other baked goods.

Also, soft drinks, energy drinks, candies and other confectionery.

It is also possible to order food grade propylene glycol for use in freezing fruits, vegetables and poultry meat.

In industry

Buy propylene glycol for antifreeze production will be a very correct and rational decision. First of all, it is safe for humans and the environment (unlike ethylene glycol). In addition, food grade propylene glycol for heating and air conditioning systems in private homes and food processing plants has been successfully used for decades. This is due to the fact that :

1. Has a wide operating temperature range from -60 to +180 degrees Celsius
2. It has a low viscosity and is easily dispersed through the system without additional equipment
3. Propylene glycol solution has a shelf life of 5 years or more
4. Does not freeze in the heating system, unlike water

More information

Propylene glycol food can be bought in Kharkiv at the warehouse of Novohim Company and with delivery in Kyiv, Poltava, Sumy, Dnipro, Zaporizhzhia, Mykolaiv, Odesa, Kherson, Vinnytsia, Zhytomyr, Lutsk, Lviv and all over Ukraine.

Our Company co-operates with all transport companies and carriers in Ukraine. You get the ordered goods exactly on time, and we provide a guarantee of reliability and quality of goods. Call and order from a trusted supplier.

The Propylene glycol food grade message appeared first on Novohim.

Properties of propylene glycol open up a large number of opportunities for the use of this product in many areas of industry. Propylene glycol solution 40% can be bought at the warehouse of Novohim Company in Kharkiv or with delivery across Ukraine.

The main application of propylene glycol 40% solution is as a coolant for heating and solar systems.

Propylene glycol solution 40% for heating as a heat transfer fluid

Its advantages are undoubtedly its high level of environmental friendliness, protection against corrosion and pressure surges in the system. It can be used in residential houses, cottages, public buildings and food processing plants.

Top 5 properties of propylene glycol 40% solution:

• safety (which makes it possible to use it in open heating systems);
• high thermal conductivity and heat capacity;
• hygroscopicity, ability to accelerate drying processes;
• solubility in water and ability to dissolve various chemical substances;
• anti-corrosion properties.

The operating temperature range of propylene glycol solution at which its properties are preserved is from -40°C to +108°C. This characteristic opens up a wide range of application possibilities. First of all, it allows to use propylene glycol solution 40% in heating systems, chillers, air conditioning systems and refrigeration systems of food processing plants.

Why is propylene glycol heating solution worth buying?

1. It will protect the circuits of heat exchange systems from corrosion
2. Increases system efficiency and improves thermal conductivity
3. It will significantly extend the service life of heat transfer systems
4. It is environmentally friendly, so it is 100% safe in use
5. More efficient in heat transfer than, for example, ethylene glycol.
6. It has a softening effect on the connecting elements of the system.

On our site you have the opportunity to buy propylene glycol 40% solution in bulk with a quality guarantee, which will ensure flawless properties of the final product of production.

It is absolutely environmentally friendly, so it is ideal for the manufacture of antifreeze for air conditioning and ventilation equipment. Propylene glycol solution for heat pumps at a concentration of 40% is the best option for heat pump operation.
As a rule, 30%-40% aqueous propylene glycol solution is mainly used, which circulates through the system and allows to bring the coolant temperature down to -12.8ºC.

The price of propylene glycol solution is well worth its purchase and the properties this product has. It is a little more expensive than ethylene glycol solution, but its vapours are safe. For example, propylene glycol water solution prevents the transmitter between the engine and radiator from freezing, and protects the driver and passengers from inhaling ethylene glycol fumes.
It also has an advantage over water. Namely, water allows to reduce the temperature only up to 1.1 ºC, which is correspondingly tens of times inferior to the capabilities of propylene glycol.

One of the main advantages of propylene glycol solution is absolute safety. Since environmental safety has a greater advantage on the world market, this product fulfils all the necessary requirements for materials of this kind.

Propyleneglycol solution in manufacturing:

1. Used for production of polyurethanes, alkyd resins, plastics
2. Propanediol is used for production of brake fluids, antifreeze, de-icing fluids
3. Propylene glycol solution is used in production of heat transfer fluids.
4. Serves as a plasticiser for cellophane and polyvinylchloride films.
5. It is a solvent for paints
6. It is also used in the production of unsaturated polyester resins.
7. Used in confectionery and cosmetic production.

More about propylene glycol solution, as well as the freezing point and density correspondence, see the following link

More information

You can buy propylene glycol concentrate, as well as propylene glycol solution from the warehouse in Kharkiv and with delivery throughout Ukraine.

Our Company co-operates with many transport companies and carriers in Ukraine. You get the ordered goods exactly on time, and we provide a guarantee of reliability and quality of goods. Call and order from a trusted supplier!

The Propyleneglycol solution 40% message appeared first on Novohim.

Fluid for heating based on propylene glycol Freezlight -20°C can be bought in Kharkiv in Novohim online shop of chemicals.

If you want to ensure stable operation of your heating system and protect equipment from overheating and corrosion, you need to pay attention to fluids for heating based on propylene glycol. The use of propylene glycol for heating is becoming increasingly popular because it is resistant to freezing even at low temperatures. Due to these properties, propylene glycol for heating systems is particularly useful in regions with cold winters.

Many customers choose propylene glycol coolant because of its environmental friendliness. Unlike other chemicals used in heat transfer fluids, propylene glycol is low-toxic and poses no danger to human health. Therefore, it is often used in residential heating systems.

This substance has many undeniable advantages in the heat transfer fluid market. Here are a few reasons why Freezlight -20°C propylene glycol-based fluid for heating is the best choice:

1. Possesses high thermal conductivity
2. Maintains its properties at extremely low temperatures and does not lose efficiency at high temperatures.
3. Propylene glycol for heating prevents system freezing in winter and protects system elements from overheating.
4. It has low corrosive effect on metals.
5. It also does not contain components harmful to human health.
6. In addition, it is not aggressive to rubber hoses and seals of the heating system.
7. The price of heating fluid is much cheaper than repairing the system after emergency freezing of water in it.
8. It has a long service life. Propylene glycol in the heating system retains its properties for several years without the need for frequent replacement.

The main advantage of propylene glycol in the heating system is its environmental safety, low toxicity and high performance.

Where is propylene glycol fluid for heating used?

Propylene glycol in heating has become the standard for many modern systems. Due to its safety and reliability, it is used in both domestic and industrial heating systems. Propylene glycol antifreeze is ideal for use in:

• Gas and two-circuit boilers
• Solid fuel boilers
• Electric boilers (except electrode boilers)
• Towel warmers
• As heat transfer medium (brine) for heat pumps
• Industrial heating and cooling systems
• Floor heating systems
• Chillers

Which heating fluid to choose, read this link

Click on the link and choose a heating and coolant fluid based on:

propylene glycol

glycerin

ethylene glycol

Eco heating fluid for solar collectors:

There is excess pressure in the solar system. Before you buy fluid for solar panels, you must remember that the temperature at which the fluid for the heating system boils increases with increasing pressure.

For example:

• If the pressure in the circuit is 2 bars, the coolant in the -20°C heating radiators will boil at a temperature of about 126 C
• At 3 bars, it will start boiling at about 142 C
• And at 4 bars – about 150 C.

When selecting a coolant, it is worth considering the type of your heating system, operating temperatures and operating conditions. For example, for gas boilers and towel rails it is recommended to choose a low viscosity and high temperature resistant coolant such as propylene glycol antifreeze. It will ensure smooth operation even at low temperatures and protect your system from corrosion and scaling.

Using a propylene glycol based heating fluid is a guaranteed protection for your heating system against breakdowns, freezing and corrosion. Whether you need a fluid for a gas boiler, towel heater or two-circuit system, propylene glycol for heating will ensure reliable operation in any conditions. Order propylene glycol antifreeze on our website right now and get a quality product with fast delivery.

To learn more about replacing the coolant in your heating system click on the link

Click on the link and see all products in this category

Here you can buy propylene glycol for heating and get advice on its use and selection. We offer only tested and certified products, which guarantees their high quality and reliability.

The Propylene glycol based heating fluid Freezlight -20°C message appeared first on Novohim.

You сan buy propylene glycol heat transfer fluid (HTF) for all types of boilers and solar collectors.

Нeat transfer fluid for heating system based on propylene glycol -32 °C FREEZLIGHT® is an effective solution for heating systems designed for use in low temperature conditions.

It is a ready-to-use propylene glycol coolant designed to protect heating and cooling systems from freezing at low temperatures. The product ensures stable coolant circulation, equipment corrosion protection and safe operation of engineering systems during the heating season.

It is used in private homes, cottages, commercial and industrial facilities, where there is a risk of system downtime or exposure to freezing temperatures.

What is a product

FREEZLIGHT coolant -32 °C is a special non-freezing liquid based on propylene glycol with a complex of anti-corrosion and stabilizing additives. The product is used as a working medium in heating, cooling and heat transfer systems, where protection against equipment destruction due to water freezing is necessary.

Key Features and Benefits

• freezing protection temperature to -32 °C;
• base – safe propylene glycol;
• corrosion and deposit protection;
• compatibility with most heating materials;
• stable operation under cyclic heating and cooling conditions;
• reduced risk of damage to pipes and heat exchangers;
• suitable for open and closed systems;
• ready-to-use compound.

In addition, propylene glycol-based heat transfer fluid for all types of boilers and solar collectors:

1. Protects pipes, radiators and heat exchangers from damage in case of coolant freezing. Protects the system up to -32 °C.
2. It works in a wide temperature range: crystallization temperature – up to -32 °C, boiling point – about +105 °C.
3. Due to its lower density compared to glycerol and ethylene glycol-based coolants, it provides better coolant circulation. According to the manufacturer, this can increase heat transfer efficiency by up to 5%.
4. It contains a modern package of carboxylate additives G13+, which provides long-term protection against corrosion, scale and deposits.
5. Helps maintain the elasticity of rubber and polymer seals, reducing the risk of premature aging.
6. Designed for a long service life – up to 10 years (subject to the manufacturer’s recommendations).
7. Safe coolant for children and animals.

Applications

Propylene glycol non-freezing fluid is used in:

• water heating systems;
• gas boilers;
• electric boilers (except for electrode boilers);
• solid fuel boilers;
• warm floors;
• heat pumps;
• solar collectors;
• process cooling systems;

Its versatility allows it to be applied both in private homes and in commercial and industrial facilities.

For which materials is suitable

Heat carrier for propylene glycol boiler can be used in systems containing:

• steel;
• stainless steel;
• copper;
• brass;
• aluminum;
• polymer pipes;
• polypropylene;
• PEX systems;
• propylene glycol compatible rubber seals.

Temperature characteristics

The heating medium for the -32 °C propylene glycol-based heating system FREEZLIGHT® is designed for use at extremely low temperatures. It guarantees protection against freezing of the heating system to -32 °C, which is especially important for regions with severe winters. Thanks to this, the heating system will function smoothly even at very low temperatures, providing comfortable warmth in the house.

How the heat carrier for double-circuit boilers works

Propylene glycol heat transfer fluid circulates through the system circuit, absorbing heat energy from the heat source and transferring it to radiators or other heat exchange surfaces.

When the temperature drops below zero, the liquid does not go into a state that can cause destruction of pipelines due to ice expansion, which allows you to protect equipment during prolonged frosts.

Тechnical characteristics

Physicochemical properties

• water-propylene glycol base;
• low crystallization temperature;
• high stability during operation;
• reduced aggressiveness to system materials;
• presence of corrosion inhibitor package;
• foaming control.

Recommendations for use

Before filling, the system must be cleaned of contamination and residues of old coolant.

Product consumption is determined solely by the internal volume of the heating system. For domestic facilities, the volume of the coolant is usually from tens to several hundred liters, depending on the configuration of the equipment.

Advantages over analogues

• lower toxicity compared to ethylene glycol coolants;
• suitable for residential buildings;
• effective frost protection;
• reduces the risk of corrosive wear;
• low density compared to glycerol;
• compatible with modern heating systems.

FAQ

Can FREEZLIGHT -32 °C be used in a warm floor?

Yes. The product is suitable for most underfloor heating systems provided that the contour materials are compatible.

How is propylene glycol different from ethylene glycol?

Propylene glycol has a significantly lower toxicity, so it is more commonly used in residential buildings.

Can a coolant be used instead of water?

Yes. This is exactly what it is intended for – to protect the system from freezing and corrosion.

Do I need to replace the coolant?

The service life depends on the operating conditions and manufacturer’s recommendations.

For which boilers is the product suitable?

For gas, electric (except electrode), solid fuel boilers, heat pumps and combined systems.

Go to the link and choose your Heat transfer fluid (HTF):

propylene glycol-based

based on glycerin

based on ethylene glycol

What is the right way to change the HTF?    Find out by following this link

Perhaps you still have more questions, then it will be useful to see more :                        

How to choose a heat transfer fluid?                          Follow this link

Which is better as a HTF or water?             Read by clicking here

Heat transfer fluid -32°C can be purchased from the warehouse in Kharkiv at manufacturer’s price or with delivery in Kyiv, Poltava, Sumy, Dnipro, Kherson, Vinnytsia and all over Ukraine.

The Propylene glycol based heat transfer fluide Freezlight -32°C TT message appeared first on Novohim.

Glycerin-based home heating fluid to buy is a profitable solution to the question of choosing a heating fluid. First of all – it is a safe heating fluid based on glycerin. Heat transfer fluid for heating a private house you can buy in Kharkiv in an online store chemistry Novohim.

When selecting a heating fluid for a heating system, it is important to consider its efficiency, environmental friendliness and compatibility with the heating equipment. Glycerine-based coolant is one of the most popular solutions due to its ability to operate in systems at low temperatures down to -20°C. However, it has its own peculiarities that are worth considering.

Glycerine-based heating medium for heating systems: advantages and disadvantages

Glycerin is a non-toxic substance that has a high density compared to propylene glycol and ethylene glycol. This means that glycerin-based heat transfer fluid makes it difficult for the fluid to move through the pipes, especially after the system has been idle for a long time. Therefore, for efficient operation of the system, it is necessary to install a pump with a power reserve 3-5 times larger than for normal water.
The main advantage of glycerin as a heat transfer medium is its environmental friendliness and absence of toxic vapours under normal operating conditions. However, there are important limitations to its use.

Top 5 properties of the fiuid for heating a cottage -20 ºC:

1. Designed for the heating system of gas and electric boilers.
2. Has a large heat capacity and thermal conductivity
3. No corrosive effect on metals, rubber seals, polymers and other materials
4. Guarantees impossibility of breakage and failure of equipment due to freezing of fluid inside the system
5. Operating temperature range in heating system from -22 °C to +90 °C.

Temperature limitations for glycerine heat transfer fluid

Glycerine has a low temperature resistance. It is dangerous to use it at temperatures above 90°C, as overheating causes glycerine to decompose and release toxic acrolein, requiring immediate replacement of the coolant.
Glycerine based heat transfer fluid is only suitable for temperature controlled systems such as gas boilers where the temperature in the heat exchanger does not exceed 60-70°C. It is the ideal solution for stable system operation without the risk of overheating.

Inconsistency for electric and solid fuel boilers

Unlike gas boilers, in electric boilers the heating elements can heat up to 300°C, which is critical for glycerine coolant. In addition, solid fuel boilers are characterised by sharp temperature fluctuations on the walls of the heat exchanger when fuel is added. These fluctuations lead to rapid overheating of the glycerol and its decomposition.
Consequently, glycerine coolant is not recommended for such systems, as there is a high risk of accidents due to incorrect operation of the coolant.

Consequently, when planning to use glycerine-based heat transfer fluid, you should always consider the specifics of your heating system and boiler type to avoid circulation and overheating problems.

Go to the link and choose your heat transfer fluid:

propylene glycol-based

based on glycerin

based on ethylene glycol

Advantages of glycerin home heating fluid -20°C :

• Unlike water, it does not freeze in the system
• To buy the glycerine heating fluid for home -20°C means to buy the product safe for people and environment
• Can be used in systems of private houses and food enterprises
• It can be used in conditioning and refrigeration systems
• Thanks to the additives in its composition has a low foaming
• Does not corrode and has a beneficial effect on rubber seals

Glycerine-based radiator coolant provides even heat distribution throughout the system, but as noted, its high density can create circulation problems if the pump is not powerful enough.

Glycerin-based underfloor heating fluid can also be used, but only where temperatures are limited to safe levels and the system has a stable temperature regime.

We offer to buy glycerine-based heat transfer fluid at the manufacturer’s price with a certificate and guarantee from the manufacturer.

Heat transfer fluid for home heating system Freezlight -20°C can be bought in Kharkiv from the warehouse of Novohim Company and with delivery in Kyiv, Poltava, Sumy, Dnipro, Vinnytsia, Kherson and all over Ukraine.

The Glycerin-based home heating fluid Freezlight -20°C message appeared first on Novohim.

Heat transfer fluid for heating systems based on glycerin: an effective solution for reliable heating of your home can be purchased in the online shop Novohim in Kharkiv.

Choosing the right coolant for the heating system is an important step to ensure stable operation of the equipment even at low temperatures (the operating temperature range of such a thermal agent is from -33 °C to +90 °C). Heat transfer fluid for heating system based on glycerin is a modern solution, which is gaining popularity due to its high anti-corrosion and heat-capacity properties. It is especially suitable for private homes where a reliable and energy efficient heating system is required. In addition, the use of this product in the heating system guarantees the impossibility of equipment breakdown and failure due to freezing of the liquid inside the system.

Glycerine-based heating antifreeze with a freezing point of -32°C has a number of important advantages that make it an ideal choice for heating systems:

1. Freeze protection: Glycerine coolant provides effective freeze protection down to -32°C, allowing it to be used in harsh winters.
2. Environmentally friendly and safe: Glycerine is biodegradable and safe for the environment, making it an optimal choice for residential and food processing applications.
3. Equipment durability: Thanks to anti-corrosion additives, glycerin-based heating system fluid prevents scale formation and corrosion, which significantly extends the life of the system.
4. Energy efficiency: Energy efficient glycerine antifreeze for heating systems has a high heat capacity, which helps to save energy and reduce heating costs. Significantly increases heat transfer compared to water.
5. Anticorrosive and antifoaming additives: Protects againstcorrosion processes of metals (cast iron, steel and non-ferrous metals). Prevents destruction of seals (Teflon, rubber, polyethylene, paronite and polyvinyl chloride);

The -32°C glycerine boiler coolant is ideal for heating systems with gas boilers. Non-freezing glycerine-based heating fluid for heating systems is recommended for private houses, cottages and industrial facilities, where it is necessary to ensure uninterrupted heating even at sub-zero temperatures

Heat transfer medium for heating systems based on glycerine: important aspects of selection and use.

The use of glycerine coolant has a number of advantages, such as high environmental friendliness, low toxicity and the ability to provide the system with protection against freezing. However, it is important to take into account the specific characteristics of this type of coolant.

Density and the need for a more powerful pump

One of the main physical characteristics of glycerine coolant is its high density, which is significantly higher than propylene glycol and ethylene glycol solutions. This property, although useful from the point of view of efficient heat transfer, significantly hampers the circulation of the fluid through the pipeline. This is especially noticeable when the system has not been in operation for a long time and needs to be restarted. Therefore, for stable operation of the system with glycerine coolant, a circulation pump with a power reserve exceeding the standard requirements for water systems by 3-5 times is required. This will avoid problems with pumping thick coolant and ensure uniform heat distribution throughout the system.

Temperature limitations

Glycerine, which is the basis of this thermal fluid, has temperature limitations. Glycerine-based heat transfer fluid cannot withstand temperatures above 90°C for long periods of time. When overheated, glycerine begins to decompose, releasing a toxic substance – acrolein. Acrolein has a pungent odour and is harmful to health, so its release requires immediate replacement of the coolant. This limitation requires a careful approach to boiler selection and careful control of the temperature regime.

Optimum conditions of use: gas boilers

To ensure the safe operation of glycerine-based heat transfer fluid, it is best used in systems with gas boilers. Gas boilers provide a stable temperature that does not exceed the optimum range of 60-70°C, which is safe for glycerine and avoids overheating.

In contrast to gas boilers, electric heating element boilers can reach temperatures of up to 300°C, which creates a high risk of glycerin decomposition. It is also not recommended to use glycerine coolant in solid fuel boilers, as they tend to have sudden temperature fluctuations on the heat exchanger at the moment of adding fuel, which can also lead to decomposition of the coolant and release of hazardous substances.

Go to the link and choose the coolant:

propylene glycol-based

on glycerine-based

based on ethylene glycol

You can buy the heating fluid for heating systems from the warehouse of Novohim Company in Kharkiv or with delivery in Kyiv, Poltava, Sumy, Zaporizhzhia, Kherson and all over Ukraine.

The Glycerine-based heating fluid for heating systems Freezlight -32°C message appeared first on Novohim.

Application

You can buy heating fluid in Kharkiv at the Novohim online chemical store.

As the cold weather approaches, more and more homeowners are thinking about how to ensure reliable operation of their heating system even at low temperatures. One popular solution is Freezlight -20°C ethylene glycol-based heating fluid. This coolant effectively prevents the heating system from freezing, extending the life of the equipment and reducing the risk of accidents.

The main task of heat transfer fluids, such as radiator fluid, is to ensure efficient heat transfer from the boiler to the radiators. Freezlight -20°C prevents system freezing by maintaining stable pressure and circulation even at extremely low temperatures.

Fluids for heating systems, such as Freezlight -20°C, show high stability and long service life.

Freezlight -20°C ethylene glycol based heating fluid is used for:

1. Heating systems as heat transfer medium
2. Cooling systems for internal combustion engines
3. As a working fluid in various heat exchangers
4. Refrigeration and air conditioning systems

House heating fluid based on ethylene glycol Freezlight -20°C meets all technical safety requirements to the maximum.

Advantages of non-freezing liquid for heating:

Corrosion protection: Anti-corrosion additives in the composition prevent the destruction of pipes and elements of the heating system. It has an extremely low corrosive effect on metals.
Protection of system elements: Neutral to rubber seals, hoses, metal and textile elements of the heating system.
Freeze prevention: Freezlight keeps the system in working order even at temperatures as low as -20°C. It does not freeze or expand. It does not freeze or expand like water.
Efficient heat transfer: Thanks to its good thermal conductivity properties, this water heating fluid ensures efficient heat distribution throughout the system.
Unique composition: Our ethylene glycol based heating fluid contains a package of advanced carboxylate additives against corrosion and scaling. Significantly increases the longevity of the heating system parts and engine.
Long life: Ethylene glycol-based fluids such as Freezlight are highly stable and durable, making them a favourable choice for long-term use.

It is important to remember that ethylene glycol based heating system fluid should only be used in closed systems to prevent the risk of leakage into the environment. Ethylene glycol is a toxic substance and its contact with air or water can be hazardous to health.

In systems with possible contact of the heat transfer fluid with air, it is recommended to use alternative, less toxic fluids, e.g. propylene glycol based. In addition, it is suitable for all types of heating systems as well as for solar panels. It is authorised for use in open circuit systems and in food processing plants.

The cost of radiator fluid can vary depending on the volume and manufacturer. For example, the fluid for heating batteries depends on the size of the system and the required amount of coolant. The choice should be made based on the individual features of the heating system, type of boiler, capacity of the circulation pump, desired temperature regime, etc.

The price of Freezlight -20°C heating fluid will of course be more expensive than using pure distilled water. However, it is much cheaper than repairing equipment when water freezes in the pipeline. Especially if it is a liquid for heating a private house, where it is not possible to stay constantly.

Follow the link and read what is better to fill in the heating system

Click on the link and choose your coolant:

based on propylene glycol

based on glycerine

ethylene glycol based

Composition and consumer characteristics:

• Heat Freezlight -20°C heating liquid is made on the basis of ethylene glycol with the use of anti-corrosion, anti-foam additives and a dye.
• Prevents freezing, corrosion, overheating and scale formation in the cooling system.
• Neutral to rubber seals.
• Recommended for use in closed single circuit systems.

The warranty period for replacing liquid for ethylene glycol heating batteries is on average 3-5 years.

Before filling the anti-freeze into the heating system, we recommend flushing the system with a deposit remover Read more about flushing the system in the article “Recommendations for replacing the coolant and maintenance behind the heating system”.

Follow the link and read more about which antifreeze to choose for heating

Packing of liquid for heating systems: canister 10kg, barrel 50kg, barrel 200kg, Eurocube 1000kg, filling from 100kg

You can buy heating system fluid in our specialised shop or order online at our website. It is important to choose only certified products from trusted manufacturers to guarantee the safety and long-term operation of the system.

You can buy liquid for heating from a warehouse in Kharkiv or with delivery in Kyiv, Dnipro, Zaporizhzhia, Poltava, Sumy, Vinnytsia, Chernihiv and throughout Ukraine.

The Ethylene glycol based heating fluid Freezlight -20°C message appeared first on Novohim.

Applications

Antifreeze for heating ethylene glycol-based in Kharkiv you can buy in an online store chemicals Novohim.

Ethylene glycol heating antifreeze -32°C is a reliable solution for closed heating systems, providing protection against freezing and corrosion. However, it is important to remember that this coolant has toxic properties and its use should be limited to closed systems to avoid the risk of airborne ethylene glycol vapours. Choosing a quality antifreeze and following all operating rules will help extend the life of your heating system and keep your home safe.

It is used for:

1. Heating systems as a heating agent
2. Cooling systems of internal combustion engines
3. As a working fluid in various heat exchangers
4. Refrigeration and air conditioning systems

Note that for closed heating systems, household antifreeze based on ethylene glycol is the optimal solution. However, it is important to ensure that it is used strictly for its intended purpose, in compliance with all safety requirements. Antifreeze for home heating system can significantly improve the operation of the system, prevent freezing of the coolant and corrosion of heating elements.

Antifreeze ethylene glycol for home heating maximum meet all technical safety requirements.

Advantages of ethylene glycol antifreeze in the heating system of a private house or production:

• Anticorrosive qualities – has extremely low corrosive effect on metals
• Protective – inert to rubber hoses and seals
• Low temperature efficiency – does not freeze or expand like water.
• Economical – has a high heat capacity. Due to the high thermal conductivity of antifreeze, the system runs more efficiently, resulting in energy savings
• Carboxylate additives in composition

The cost of antifreeze can depend on various factors, according to its composition and brand. In addition, the price of antifreeze in the battery will vary depending on the volume and manufacturer. However, when choosing antifreeze for heating based on ethylene glycol, it is important to consider not only the price, but also compliance with safety requirements. You can buy antifreeze for closed type heating system in our online shop directly on the website or order by phone

The price of antifreeze for heating will of course come out more expensive than using distilled water. However, it is much cheaper than making repairs to equipment when the water in the pipeline freezes. Especially if it is antifreeze for heating a country house, where there is no possibility of being there all the time.

Therefore, if you are asking what antifreeze for home heating is advisable to pour, our technicians will answer all questions and will choose the best variant of heat carrier and offer to calculate the necessary amount of antifreeze for heating.

Follow this link and read what’s best to put in the heating system

Composition and consumer characteristics:

• Heating antifreeze is made on an ethylene glycol basis with anti-corrosion, anti-foam additives and dye.
• Prevents freezing, corrosion, overheating and scale formation in the cooling system.
• Neutral to rubber seals.
• Recommended for use in single-circuit closed systems.

Ethylene glycol antifreeze for heating systems has an average service life of 3-5 years.

Before pouring antifreeze into the heating system we recommend flushing the system with a deposit remover Antirzhavin . Read more about flushing the system in the article “Recommendations for changing the heat transfer fluid and maintenance of the heating system”.

What kind of antifreeze in the heating battery?

1. Propylene glycol based antifreeze
2. Ethylene glycol antifreeze
3. Antifreeze based on glycerin
4. Salt antifreeze (our company does not produce because of strong corrosive activity)

Which antifreeze for heating is better? Using each of the above antifreezes for the heating boiler has its pros and cons. The choice should be based on the individual characteristics of the heating system, boiler type, circulation pump capacity, the desired temperature range, etc.

Follow the link and choose your antifreeze for heating based on:

propylene glycol

glicerin

ethylene glycol

It is worth noting that propylene glycol antifreeze is the most environmentally friendly and safe. In addition, it is suitable for all types of heating systems as well as for solar panels. It is approved for use in open circuit systems and food processing plants.

Why choose Antifreeze for heating?

1. The base has a wide range of operating temperatures without changing its properties and without freezing from -65 to +160C
2. Our heating anti-freeze based on ethylene glycol contains a package of modern carboxylate additives against corrosion and scaling
3. Neutral to rubber seals, metal and textile elements of the heating system
4. Antifreeze for solid fuel boilers significantly increases durability of parts and engine heating system
5. Has ideal structure – moderately viscous and more fluid than water
6. The price of ethylene glycol antifreeze is much lower than that of propylene glycol. However, its toxic properties must be taken into account.

Follow this link and read more about what kind of antifreeze to choose for heating

Antifreeze in the heating systems can be bought from a warehouse in Kharkiv or with delivery in Kyiv, Dnipro, Zaporizhzhia, Poltava, Sumy, Vinnytsia, Chernigov and all over Ukraine.

The Ethylene glycol-based antifreeze for heating Freezlight -32°C message appeared first on Novohim.