+38 (099) 799-99-92 
+38 (067) 55-999-05 
+38 (067) 55-999-07 
I-5A industrial oil (spindle oil) is a general purpose industrial lubricant without additives.
Industrial oil I-5A application
In mechanical engineering and metalworking
Industrial oil I-5A in Kharkov you can buy in the online shop of chemicals Novohim.
Industrial oil I-5A by its composition belongs to distillate and residual oils or their mixtures. It has no additives in its composition. It has average kinematic viscosity at 40°C 6-8 mm2/s according to GOST.
It can be used for industrial machines and mechanisms of low load. In addition, it is used on industrial equipment that does not have high technological requirements to the composition of oil (lubricating or hydraulic fluid). For example, it can be mechanisms or machines for construction or road works, industrial presses, machine tools, sliding guides, etc.
As for the use of industrial oil on machine tools, it is also necessary to take into account that due to the absence of appropriate additives in its composition, the requirements for heat dissipation, anti-corrosion, anti-foaming, anti-oxidation protection of such machines should also be absent. This information is obligatory specified in the equipment documentation.
Follow the link and read how to make cutting fluide with your own hands
If the requirements are high, e.g. for CNC machines, automatic and semi-automatic machines, then in this case high-tech coolants with all the above-mentioned additives are used as a lubricating fluid. These can be synthetic, semi-synthetic fluids or emulsols with increased oil content.
| Name of indicator | Industrial oil I-5A |
| Kinematic viscosity, at 40°C, mm2/sec | 6-8 |
| Acid number, mg KOH per 1 g of oil, max. | 0, 02 |
| Ash content, %, max. | 0, 0011 |
| Mass fraction of water, %, max. | Not available |
| Mechanical impurities content | Not available |
Click on the link and see all products from the Lubricants and Coolants catalogue
Advantages of industrial oil I-5A:
- No mechanical impurities in the composition
- No solvents
- Can be used in vehicles and stationary mechanisms
- Possesses good lubricating properties
- Can be used in mechanisms of different types of load and travel speeds
Click on the link and see all products from the Industrial Chemicals catalogue
Industrial oil I-5A can be bought from the warehouse of Novohim Company in Kharkov or with delivery in Kiev, Dnipro, Odessa. Kherson, Zaporozhye, Lviv, Ternopil and all over Ukraine.
Reviews
There are no reviews yet.