Defender “LIGHT” – semisynthetic cutting fluid to buy from a warehouse online store chemicals in Kharkiv.

It is used for processing:

• copper
• bronze
• aluminum and their alloys
• cast iron
• conventional grades of steel.

Recommendations for application

Before preparing the working solution, thoroughly stir the coolant concentrate. Cutting fluid Defender “Light” is suitable for any machining operations by cutting and grinding with the concentration of the working fluid from 3% to 5%.

Advantages of Defender “Light”

1. Easy and quick preparation of the working solution (dilution) in common water not requiring special preparation
2. Long working time of the working solution in machines, which does not require introduction of additional additives and bactericides.
3. High concentration, which considerably reduces the consumption of the working solution.
4. Contains no nitrite, chlorine, formaldehyde, which meets the requirements of environmental protection.
5. Low foaming
6. Long storage life of concentrate.

The price of semi-synthetic cutting fluid Defender “LIGHT” may depend on the product package.

Store the coolant at a temperature of +5°C or higher!

Follow this link to see all products in this category

Read here how to change the cutting fluid correctly

Semi-synthetic cutting fluid Defender “LIGHT” you can buy in Kharkiv and with delivery in Kyiv, Zaporizhzhia, Poltava, Sumy, Dnipro, Kherson, Vinnytsia and all over Ukraine.

The Cutting fluid Defender LIGHT / Coolant-lubricant fluid Defender LIGHT message appeared first on Novohim.

You can buy Defender “Pro” metal cutting fluid in the online store of chemicals Novohim for all steel grades, including superhard steels.

Firstly, it is applicable to work on cast iron, aluminum and its alloys. Secondly, it is recommended for CNC machines, automatic and semi-automatic machines. And thirdly, it is designed to work on both low-speed and high-speed machines.

It is noteworthy that Defender “Pro” concentrate is diluted with normal tap water, by light agitation.

Advantages of DEFENDER “PRO” (high oil content coolant):

1. Quick and easy preparation of the working fluid (dilution) in common water not requiring special preparation
2. Has unique lubricating properties which allow considerable increase in wear resistance of cutting tools.
3. Low foaming
4. Recommended for machining of high-alloyed steels in particularly heavy applications
5. Long working life of the working fluid in the machine, requiring no additional additives or bactericides
6. Long shelf life of the concentrate
7. Environmentally friendly with no sulfur- or chlorine-containing additives, nitrites, phenols

Examples of applications of the Defender PRO coolant:

An enterprise for machining stainless steel parts.

Initial situation:

The coolant from another Ukrainian manufacturer, which the customer had previously used, caused allergies among the employees. In addition, it gave a low quality of metal processing. Then the customer switched to an imported coolant with oil content over 40%, but the price did not correspond to the quality. The working solution was heterogeneous and with inclusions of particles. As a result, the purpose of the tests was to find a coolant with oil content over 40%, which would provide the necessary quality of processing of stainless steel.

Solution:

After that it was suggested to buy Defender “Pro” coolant. The working solution of the coolant was prepared in 5% concentration in a special tank for the preparation of the working solution. Then, from this tank, the working fluid was poured into the machines on which the stainless steel parts were machined.  It should be noted that the water used to prepare the working solution was tap water. And for refilling the machines a 3% solution of Defender “Pro” coolant was prepared. It was also ensured that the concentration of coolant was checked with a refractometer.

Result:

To summarize, the coolant Defender “Pro” showed excellent quality of processing of stainless steel parts, as well as high lubricating properties. Besides the Customer reported that the quality of Defender “Pro” coolant significantly exceeds some European brands. The service life of the coolant has already exceeded 1 year without replacement.

Manufacturers of parts for agricultural machinery.

Initial situation:

The customer suggested testing Defender “Pro” coolant because of constant problems with the use of the previous product. First, high tool wear; second, high coolant consumption; third, foaming and instability of the working solution.

Solution:

First of all, the following was suggested and poured: a 3% working solution of Defender “Pro” coolant in a circular grinding machine and a 4% solution in a new CNC machine. After that the parts of high-carbon steel, cast iron, stainless steel were processed. In addition, the basic indicators of the coolant were constantly monitored.

Result:

The result was a product life of 11 months without the introduction of acticides and defoamer. And most importantly, the customer reported a high cleanliness of the workpiece surface and a 52% reduction in tool wear. In addition, the protection of cast iron parts was increased by almost 60%.

Recommended concentration for metalworking:

• Turning – 3%
• Drilling – 4%
• Deep Hole Drilling – 5%
• Punching – 3%
• Gear cutting – 5%
• Thread rolling and thread cutting – 5%
• Milling – 4%
• Boring – 3%
• Honing – 3%.

Price of Defender “Pro” lubricant coolant fluid quite justifies all advantages of its use and also may vary depending on package.

Follow this link to see all products in this category

Read 10 rules for working with cutting fluid here

Cutting fluid Defender “Pro” you can buy in Kharkiv from the warehouse of Novohim Company and with delivery in Kyiv, Dnipro, Zaporizhzhia, Sumy, Poltava, Vinnytsia, Kherson and all over Ukraine.

The Lubricant-coolant fluid Defender PRO \ Cutting fluid Defender PRO message appeared first on Novohim.