In metalworking

BIOL-UNIVERSAL-Winter cutting fluid can be bought in Kharkiv in the online shop of chemicals Novohim.

This cutting fluid as well as BIOL-UNIVERSAL cutting fluid is intended for use in metal machining. For clarification, the concentrate of this coolant is used for works in winter period down to -20 ºC.

Undoubtedly, one of the best developments for work at low temperatures is BIOL-U-WINTER cutting fluid. Firstly, it has excellent lubricating, highest anti-corrosion and antibacterial properties. Secondly, it does not contain sodium nitrite, chlorine and other harmful substances. And thirdly, it is suitable for work in unheated areas down to -20 ºC.

For obtaining a 5% working coolant solution:

1. When working down to -5 ºC, it is mixed with water at a ratio of 1:4 (1 part of concentrate and 4 parts of water)
2. For works down to -10 ºC, mixed with water in the ratio 1:2.5 (1 part of concentrate and 2.5 parts of water)
3. At temperatures down to – 20 ºC mixed with water in a ratio of 1:1.3 (1 part of concentrate and 1.3 parts of water)

For example, the concentrate is intended for use down to -20 °C. Mix with water in a ratio of 1:1.3 (10 kg of concentrate to 13 kg of water). The volume of the finished working solution is 23 litres.
When working with a concentration significantly higher than the recommended rate (10%), it is necessary to use personal protective equipment for the skin.

Buy Biol-U-Winter lubricant-coolant fluid in Kharkiv from Novohim Company warehouse and with delivery in Kyiv, Sumy, Zaporizhzhia, Poltava, Dnipro, Vinnytsia and all over Ukraine.

The Cutting fluid BIOL-UNIVERSAL-Winter message appeared first on Novohim.

In metal working

Buy Biol Eco-GREAM in Kharkiv at the Internet-shop of chemical agents Novohim.

This cutting fluid as well as Coolant Biol-ECO, is designed for use in machining of metal. To clarify, the concentrate of this coolant is used for winter works down to -20 ºC.

Undoubtedly, one of the best developments for work at low temperatures is coolant “BIOL-ECO-ZIMA”. Firstly, it has excellent lubricating, the highest anticorrosive and antibacterial properties. Secondly, it does not contain sodium nitrite, chlorine and other harmful substances. Thirdly, it is suitable for works in unheated rooms down to -20 °C.

To obtain 5% of working solution of coolant:

1. For works up to -5 ºC mix with water in the ratio of 1:4 (1 part of concentrate and 4 parts of water)
2. For works down to -10 ºC mix with water in the ratio of 1:2.5 (1 part of concentrate and 2.5 parts of water)
3. At temperature down to -20 ºC mixed with water in ratio 1:1,3 (1 part of concentrate and 1,3 parts of water)

Lubricant-coolant Biol-ECO-Winter buy in Kharkiv from Novohim Company warehouse and with delivery in Kyiv, Sumy, Zaporizhzhia, Poltava, Dnipro, Vinnytsia and all over Ukraine.

The Lubricant-coolant fluid BIOL-ECO-ZIMA message appeared first on Novohim.

This cutting fluid increases the quality of metal surface treatment up to 35%. It works with such metals as aluminum, titanium, steel and cast iron. Moreover, it is specially designed for machining aluminum parts.

This lubricant-coolant fluid is also available in a winter version, namely Cutting fluid Biol-ECO-ZIMA. To clarify, designed to work in unheated shops. Withstands temperatures down to -20C.

Example of Biol ECO coolant application:

Aluminum parts machining company

Initial situation:
An aluminum processing company was interested in testing with Biol Eco cutting fluid. This is because they had problems using their previous cutting fluid. Firstly, we faced the issue of worker allergies. Secondly, the extremely short service life of the coolant and thirdly, the high consumption of concentrate.

The solution:
First of all, from a tank for centralized preparation of coolant solution, each machine operator poured the working solution into the machines. To clarify, on which aluminum pistons were machined. Full control of the coolant concentration was ensured. Then a 2% working solution of Biol-Eco cutting fluid was prepared for refilling. Tap water was used to prepare the working coolant solution.

The result:
As a result, Biol Eco cutting fluid showed excellent performance results. Biol Eco lubricant-coolant fluid has already lasted more than two years at this plant without replacement, which has significantly reduced concentrate consumption. The customer reported excellent quality of aluminum processing and significant improvement of production cleanliness.

Intended for metal processing:

1. Aluminum
2. Titanium
3. Cast iron
4. Medium and high alloy steels
5. Stainless steel.

Recommended concentration of the working solution:

• Turning -3-5%
• Drilling -5%
• Hobbing -5-7%
• Thread rolling -5-7%
• Milling -5%
• Boring -5%
• Grinding tools 5%

See all products in this category by clicking here

Lubricant-Coolant fluid Biol Eco is possible to buy in the Company Novohim from a warehouse in Kharkiv or with delivery in Kyiv, Poltava, Zaporizhzhia, Dnipro, Vinnytsia, Sumy and all over Ukraine.

The Lubricant-cooling fluid Biol Eco / Cutting fluid Biol Eco message appeared first on Novohim.