Archives Blasocut 2000 CF Universal - Novohim Online store of chemical raw materials and materials Fri, 24 Apr 2026 08:44:54 +0000 en-GB hourly 1 https://wordpress.org/?v=7.0.1 https://novohim.com.ua/wp-content/uploads/2024/06/favicon@72x-100x100.png Archives Blasocut 2000 CF Universal - Novohim 32 32 247251005 Lubricant-coolant fluid Defender Standard / Cutting fluid Defender Standard https://novohim.com.ua/en/catalog/cutting-fluids/cutting-fluid-defender-standard/ https://novohim.com.ua/en/catalog/cutting-fluids/cutting-fluid-defender-standard/#respond Tue, 20 Apr 2021 12:05:27 +0000 https://novohim.com.ua/?post_type=product&p=21749 Defender "STSNDARD" does not contain alkali, pH-7.2, like tap water and does not cause corrosion on copper and its alloys, aluminum and other non-ferrous metals, environmentally friendly does not contain sulfur and chlorine additives nitrite, phenols

DEFENDER "STANDARD" coolants are industrially produced by combining high quality mineral oils, surfactants, acticide and bactericide.

DEFENDER "STANDARD" is packed in polyethylene barrels and canisters, standard packaging consists of 50 and 10 liters. Concentrate Defender "Standard" is stored in a closed container, in a closed warm room, away from flammable materials. Temperature from +5C to +40C. Avoid freezing and direct sunlight. Shelf life 12 months from the production date.

The Lubricant-coolant fluid Defender Standard / Cutting fluid Defender Standard message appeared first on Novohim.

]]> Defender STANDARD coolant application:

Defender “Standard”- semi-synthetic cutting fluid can be purchased from the warehouse of the online store of chemicals in Kharkiv.

Semi-synthetic lubricant-coolant fluid Standard has a balanced composition. Namely, the content of high-quality oil, which allows excellent performance of lubricating functions of technological fluid and at the same time provides cleanliness of the working area and details.

It is used for machining:

  • copper
  • bronze and titanium
  • aluminium and their alloys
  • iron products
  • conventional grades of steel.

Recommendations for use

Before dilution, the coolant concentrate must be thoroughly stirred.Metal cutting fluid Defender “Standard” is suitable for any operations of machining and grinding with the concentration of the working fluid from 3% to 5%.

Advantages of cutting fluid Defender “Standard”:

  1. Easy and quick preparation of the working solution (dilution) in common water that does not require special preparation
  2. Has high lubricating and corrosion protection properties
  3. Increases productivity and improves surface finish quality by up to 50%
  4. Provides preservation of cutting tools by 1.5-2 times
  5. Long life of the working solution in the machines, which does not require the introduction of additional additives and bactericides.
  6. High concentration, which greatly reduces the consumption of working fluid.
  7. Contains no nitrite, chlorine, formaldehyde, which meets the requirements of environmental protection.
  8. Low foaming
  9. Long shelf life of the concentrate.

The price of semi-synthetic cutting fluid Defender “STANDARD” may change depending on the product packaging.

Store the coolant at a temperature of +5°C or above!

 

Follow this link to see all products in this category

Read here how to change the cutting fluid correctly

 

Buy cutting fluid Defender “STANDARD” in Kharkiv and with delivery in Kyiv, Zaporizhzhia, Poltava, Sumy, Dnipro, Kherson, Vinnytsia and all over Ukraine.

The Lubricant-coolant fluid Defender Standard / Cutting fluid Defender Standard message appeared first on Novohim.

]]> https://novohim.com.ua/en/catalog/cutting-fluids/cutting-fluid-defender-standard/feed/ 0 21749